A four-piece kit is the most common engine order we quote and the most common engine order that comes back. Not because the parts are wrong in themselves, but because a kit is a matched set: liner, piston, ring set and piston pin have to belong to the same engine variant, and the variant is written on the engine, not on the excavator. This guide is the method we use at the counter, and it is the same method we will run through at booth E4.187 during bauma CHINA 2026.
What the four pieces are, and what "matched" means
The four pieces are the cylinder liner, the piston, the ring set and the piston pin. In a correct kit they are matched in three dimensions at once: the liner's outer diameter and flange height must suit the block, the piston's compression height and bowl must suit the head and the injector, and the pin must suit the connecting rod's small end. Rings are matched to the piston groove, not to the bore alone.
That is why a kit sold purely by machine model is a gamble. Two SK200-8 machines of different production years can carry different engine variants, and the parts book will show both. The engine serial plate is the only reliable starting point, and a photograph of it is worth more than a paragraph of description.
The five numbers that decide fit
| What to record | Why it decides the kit |
|---|---|
| Engine model and serial | Fixes the variant, the parts book edition and the change points. This is the first question on every quote. |
| Liner flange diameter and height | Distinguishes press-fit and flanged liners and catches block deck differences that a model name hides. |
| Piston pin diameter | Full-floating and semi-floating pins are not interchangeable, and the rod small end follows the pin. |
| Ring groove width and ring thickness | Ring sets are matched to the piston groove. A ring set for the right bore but the wrong groove will not seat. |
| Piston bowl and compression ratio | Bowl shape is tied to the injector and the emission setup. A visually similar piston can be the wrong combustion match. |
Mitsubishi and Hino kits fail differently
The Mitsubishi engines in the Kobelco range and the Hino J05 and J08 engines are different families with different liner retention and different pin arrangements. A kit that is correct for one is not a starting point for the other, and the failure pattern that brings the machine in is usually different too.
On the Mitsubishi side, liner pitting and coolant-side erosion are common reasons for a rebuild, which is why the cooling system deserves a look before the kit is ordered: a new liner set behind a tired water pump and a clogged radiator will not last. On the J05 and J08 side, heat history shows up in the liner and ring area, and the head gasket version matters because early and late versions are not interchangeable. If the head is coming off anyway, order the gasket by engine serial and check the version before the kit is packed.
We hold Mitsubishi Heavy Industries as an authorized line. Hino J05 and J08 parts are supplied as genuine or OEM-quality, and the grade is stated on every quotation rather than left to assumption.
Three things that cause rework
Ordering by machine model only. The model tells you the application; the engine serial tells you the part. When a customer sends "SK200-8 four-piece kit" with no serial, we quote the two most likely variants and ask for the plate. It costs one message and saves a return.
Measuring a worn liner and calling it the size. A worn bore is not the specification. Measure the unworn area or use the engine's standard dimension, and check roundness as well as diameter. A kit chosen from a worn measurement is undersized before it is installed.
Reusing stretch bolts and single-use fasteners. The kit does not include them unless it is quoted as a full set. Confirm what is in the box before the engine is stripped, not after.
What to bring to booth E4.187
Bring the engine serial plate photographed straight on, the old piston or liner if it is out, and the part number from the parts book if you have one. A photograph of the engine bay helps more than a description, because hose routing and manifold shape often identify the variant faster than the model year does.
With those three things, the two engine sessions at the booth are enough to leave with a matched kit list rather than a guess:
| Session | Time | What it covers |
|---|---|---|
| Mitsubishi four-piece matching | 24 Nov, 10:30 (10 min) | The five numbers, the common mismatch, and how to read the serial plate. |
| Hino J05 / J08 four-piece class | 24 Nov, 14:00 (30 min) | Kit matching and the mistakes that cause a second teardown. |
Show facts, because the venue dates differ
bauma CHINA 2026 is the first edition with two venues. Shanghai World Expo Exhibition & Convention Center (SWEECC, 1099 Guozhan Road) runs 23-26 November, 09:00-17:00 on 23-25 November and 09:00-15:00 on 26 November. SNIEC (2345 Longyang Road) runs 24-27 November, 09:00-17:00 on 24-26 November and 09:00-15:00 on 27 November. Our stand is in Hall E4 at SNIEC, booth E4.187, so we are on the SNIEC calendar: 24 to 27 November.
One badge covers both venues for the whole show period. Registration is free until 00:00 on 21 November; after that a ticket is RMB 80 at the door. Registration is real-name and one badge per person, and the name, ID number and phone number cannot be edited afterward, so check them before submitting.
By metro, Line 7 to Hualong Road, Exit 1 or 2, puts you about a minute from Hall 2, the entrance closest to E4. Lines 2, 7 and 16 also reach Longyang Road. From Pudong Airport the maglev takes about ten minutes to Longyang Road.
If you cannot come
Send the engine plate photograph, the old part numbers and the quantity to +86 181 4482 5432 (WhatsApp and WeChat). We will confirm the variant, state the grade and put the kit list in an English quotation with the lead time per line. Same method, without the flight.
Frequently Asked Questions
Is a four-piece kit the same as an engine overhaul kit?
No. A four-piece kit covers liner, piston, ring set and pin for the power cylinder. An overhaul kit normally adds gaskets, seals, bearings and sometimes the oil pump and timing components. Quote the two separately so nothing is assumed to be in the box.
Can you match a kit from the machine model alone?
We can narrow it to the likely variants, but not confirm it. Kobelco used more than one engine variant across the life of a model, and the parts book lists both. The engine serial plate is what turns a probable kit into a correct one.
Do you supply both Mitsubishi and Hino engine parts?
Yes. Mitsubishi Heavy Industries is an authorized line for us. Hino J05 and J08 parts are supplied as genuine or OEM-quality, and the grade is written on the quotation.
Can you identify the engine from photographs?
Usually, if the serial plate is legible and the photo is straight on. Add one wide shot of the engine bay. If the plate is painted over or missing, the casting numbers and the injector part number are the next best evidence.
Are the four pieces available separately?
Yes. Some customers need one liner or one piston, and we quote single pieces as readily as sets. The matching rules do not change: the piece must belong to the same engine variant as the rest of the cylinder.