Kobelco excavator parts specialist since 2007 — Guangzhou, China WhatsApp / WeChat: +86 181 4482 5432 · Tel: +86 20-32036036 · kobelco-parts@foxmail.com
Blog

What Actually Crosses Between Kobelco SK-8 Models: A Parts Commonality Map

Not every SK-8 consumable is model-specific, and not every shared-looking part is safe to swap. Guangzhou Shenyue Machinery Technology Co., Ltd. maps what really crosses between SK130-8, SK200-8 and SK330-8.

Blog / What Actually Crosses Between Kobelco SK-8 M…
November 17, 2026 · Shenyue Kobelco Parts Team
Fuel filter with priming pump recorded for J05 and J08 engines
A fuel filter with priming pump recorded for J05 and J08 engines. Consumables are the layer where sharing between machines usually works.

Fleet owners running several SK-8 machines eventually ask the same question: how much of the parts store can be shared? The answer is more useful than a simple yes. Guangzhou Shenyue Machinery Technology Co., Ltd. has supplied the SK-8 generation since it was current, and our records put Kobelco parts into three tiers: consumables that genuinely cross, platform parts that cross only inside one family, and parts that look interchangeable and are not. Getting the tier wrong is how a fleet ends up with a shelf of almost-right parts and a machine that runs badly.

Why the question matters more than it used to

A mixed fleet of SK130-8, SK200-8 and SK330-8 machines looks like an obvious chance to standardise — one filter number, one hose number, one bearing. Sometimes it works, and the saving in stock and administration is real. Sometimes it produces a failure that takes a week to find, because the part did fit and the machine did run, just not correctly. The difference is not luck. It is what the parts record actually says.

Tier one: consumables that genuinely cross

Filters are the strongest case. Kobelco used a small number of filter families across the SK-8 range, so several numbers are recorded against more than one model. When our own records name two machines on the same line, that is a strong signal — but the nameplate still governs, because a machine rebuilt with a different engine option will not follow the catalogue.

ItemNumber in our recordsRecorded as
Pump suction hoseYN30H01196P1SK200-8 / SK210-8
Oil coolerYN05P00058S002SK200-8 / SK210-8
Fuel filterYN21P01068R100J1N / J1LSame family, different packaging suffix
Air filter setYN11P00034R100Outer and inner element as a set
Intercooler air pipeLC05P01526P1SK330 / SK350-8

Hoses behave the same way when the routing is unchanged. YN30H01196P1 is recorded for both SK200-8 and SK210-8 because the two machines share the pump bay layout. LC05P01526P1 appears for SK330 and SK350-8 because the intercooler sits in the same place on both. Those cross-references are safe while the serial and configuration match; they stop being safe on a machine that has been repowered or rebuilt from parts of two donors.

Tier two: platform parts that cross inside a family only

The SK200-8 and SK210-8 share the GM38VB travel motor. The next generation moved to GM38VC, and the two are not interchangeable: the mounting and the control interface changed. Inside a family the internal parts cross freely; across the boundary nothing does. The same pattern holds for pumps. K3V112DT is the SK200-8 class pump, while K5V140 belongs to the SK330-8 and SK350-8 class. Both are Kawasaki-designed, both look similar on a bench, and fitting the wrong one produces a machine that runs well enough to destroy itself.

Swing motors follow the same logic. The M5X130 class covers the twenty-tonne machines, while the M5X180 class serves SK330-8 and above; our records carry LC15V00022F1 in the larger class. A buyer who treats "swing motor" as one part has already lost the argument.

Tier three: parts that look identical and are not

This is where the expensive mistakes sit. Part-number prefixes are not decoration. VH numbers are Hino-sourced groups and VW numbers are Cummins-sourced groups, and the two never interchange even when the component looks the same. On the filter and sensing side, LS30, LS50 and LS52 belong to large-machine platforms. Hose assemblies are worse: one base number can carry several suffixes for length, end fitting or routing, and the suffix is the part.

Photographs mislead here too. Two hoses on a bench can look identical and differ by forty millimetres and one fitting angle, which is enough to put a bend where the designer wanted a straight run.

How Guangzhou Shenyue Machinery Technology Co., Ltd. handles a cross-reference: we ask for the model, the serial number and a photo of the nameplate before confirming that a part from one SK-8 model will serve another. If the record does not support the swap, we say so and quote the correct number instead of the convenient one.

A rule set that holds up in the yard

Treat filters and oils as the shared layer. Treat pumps, travel motors, swing motors and control valves as family parts — check the family number, not the description. Treat hoses, harnesses and brackets as machine-specific until proven otherwise. And when a supplier offers a cross-reference, ask which record it comes from; a number quoted from memory is not a record.

Buyers who also source across brands through corbayparts.com see the same trap in another form: a number that fits three brands on paper and one machine in practice. The discipline is identical, and so is the cost of skipping it.

Where to check before committing

Start with the model pages for the machines in your fleet — the SK200 and SK330 pages carry the component families we see most often — then confirm the number on the part number search page. If a travel motor is in question, the GM38VB guide explains why the -8 and -10 units do not cross. Kobelco's own corporate site remains the reference for model history.

Commonality is a real saving, but only at the consumable layer. Everything above it should be verified against the machine in front of you, not against a hunch — which is why Guangzhou Shenyue Machinery Technology Co., Ltd. quotes by serial number rather than by description.

Frequently Asked Questions

Can I use SK200-8 filters on an SK210-8?

Usually yes for the engine and hydraulic filter families, because the two machines share the same filter groups and our records name both models on the same numbers. Guangzhou Shenyue Machinery Technology Co., Ltd. still confirms against the serial number, since a rebuilt engine can change the filter head.

Are GM38VB and GM38VC travel motors interchangeable?

No. GM38VB covers the SK200-8 and SK210-8, while GM38VC arrived with the next generation and changed both the mounting and the control interface. Internal parts cross inside each family only, and a complete unit never crosses the boundary.

Is K5V140 a direct upgrade for K3V112DT?

No. K3V112DT is the SK200-8 class pump and K5V140 belongs to the SK330-8 and SK350-8 class. Fitting the larger pump changes flow and control behaviour, so it is a conversion rather than a replacement, and it needs the matching regulator and settings.

How do I confirm a cross-reference before ordering?

Send the machine model, the serial number and a photo of the nameplate to Guangzhou Shenyue Machinery Technology Co., Ltd. We check the number against our records and confirm or correct it. A cross-reference without a serial number is a guess, however confident it sounds.

Need the parts this article talks about?

Send your part numbers and a photo of the nameplate — real photos and pricing come back with the quote.

Start an Inquiry