Owners rarely ask whether a part fits "a Kobelco". They ask whether it fits their machine, and on the twenty-tonne class the question usually arrives as a pair: SK200-8 or SK210-8. The two model plates sit on machines that leave the same assembly line, and most of what wears out is common. A minority of it is not, and that minority is where money gets wasted. Guangzhou Shenyue Machinery Technology Co., Ltd. keeps both models in one record set, which makes the overlaps and the exceptions easy to see.
Why the pair is treated as one platform
The SK200-8 and SK210-8 carry the same HINO J05E engine family, the same main hydraulic layout and the same undercarriage pitch. Market naming differs, and the dig envelope is quoted slightly differently, but the service parts that fail on a five-thousand-hour schedule are largely one list. That is why a dealer can hold one shelf for both machines, and why a buyer who owns three of them can standardise filters, hoses and seals without doubling the inventory.
What crosses without argument
The core rotating and hydraulic assemblies are the strongest overlaps. Both models are recorded with the Nabtesco GM38VB travel motor, the K3V112DT hydraulic pump and an M5X130-class swing motor. The main relief group is quoted under V9510318049-T, LP22V00001F1 and YN22V00004F1 for the pair, the pilot filter under YN50V00020F1, and the hydraulic oil cooler under YN05P00058S002 — our own product record for that cooler names both models, which is the kind of confirmation a catalogue number alone does not give you.
| Assembly | Number we record | Fits both? |
|---|---|---|
| Travel motor | Nabtesco GM38VB | Yes |
| Main hydraulic pump | K3V112DT | Yes |
| Swing motor | M5X130 class | Yes |
| Main relief valve group | V9510318049-T / LP22V00001F1 / YN22V00004F1 | Yes |
| Pilot filter | YN50V00020F1 | Yes |
| Hydraulic oil cooler | YN05P00058S002 | Yes |
| Pump suction hose | YN30H01196P1 | Yes |
What does not cross
Three traps account for most wrong deliveries on this pair. First, the travel motor changes at the generation boundary: SK200-10 machines use GM38VC, and a GM38VB will not substitute for it, nor the reverse, because the mounting and the control interface changed with the motor. Second, the K5V140 pump belongs to the SK330-8 and SK350-8 class, not to a twenty-tonne machine, and a buyer who has seen the number on a bigger unit will sometimes ask for it by mistake. Third, the SK250-8 is a different frame size; we do not cross-list its undercarriage and hydraulic assemblies with the SK200-8 / SK210-8 pair, and any supplier who does should be asked for the serial-level evidence.
Practical check: photograph the model and serial plate before ordering anything hydraulic. Guangzhou Shenyue Machinery Technology Co., Ltd. verifies every assembly number against that plate, because the same physical shape can carry two different motors across a generation change. Every line is quoted as genuine, OEM or aftermarket, so a shared number never hides a different grade of part.
Three checks before you pay
Ask for the full part number, suffix included, and compare it character by character — the generation differences guide shows where the boundary between the two machines sits. Confirm the generation from the plate rather than from the paint or the decal, since repainted machines are common. Then confirm the assembly, not the symptom: a travel motor that "feels weak" is more often a relief or a swivel issue than a failed motor, and the motor number families guide shows how to separate the two before spending.
Where buyers get caught
The expensive mistake is not buying the wrong brand; it is buying a correct-looking number for the wrong generation, then discovering it at installation. A second mistake is assuming that shared numbers mean shared wear rates: the SK210-8 usually works with a slightly larger bucket, so its pins, bushings and bucket linkage take more load even where the part number is identical. A third is ordering for a machine that has been repowered or rebuilt with a later engine, which changes the filter and turbo references without changing the model plate. Keep one machine file per unit, record hours against each replacement, and photograph the engine plate whenever an engine-side part is ordered. Guangzhou Shenyue Machinery Technology Co., Ltd. keeps the two models on one record set precisely so these exceptions stay visible at quoting time rather than at installation. For machines outside the Kobelco range, excavatorpartsglobal.com covers the multi-brand side of the same sourcing problem. Full catalogues and current stock positions are on our catalogue page, the part number search accepts a plate photo if the number itself is unreadable, and Kobelco's own model documentation is published at kobelco.co.jp.
Frequently Asked Questions
Can I use an SK200-8 travel motor on an SK210-8?
Yes. Both models are recorded with the Nabtesco GM38VB travel motor, so the assembly crosses between them. The same motor does not fit the SK200-10, which uses GM38VC. Guangzhou Shenyue Machinery Technology Co., Ltd. confirms the generation from the serial plate before shipping.
Is the K3V112DT pump shared between the two models?
Yes. The K3V112DT is the pump we record for both the SK200-8 and the SK210-8. The larger K5V140 belongs to the SK330-8 and SK350-8 class and should never be ordered for a twenty-tonne machine, even though the two pumps look similar at a glance.
Which hydraulic parts are not interchangeable with the SK250-8?
We do not cross-list undercarriage and hydraulic assemblies between the SK250-8 and the SK200-8 / SK210-8 pair, because the frame size differs. Ask for serial-level confirmation before accepting a claim that a large assembly fits both.
Do shared part numbers mean the same service life?
No. A shared number can still wear faster on one model if it works with a larger bucket or harder ground. Guangzhou Shenyue Machinery Technology Co., Ltd. advises recording hours per machine rather than per fleet, so the next replacement is planned on real data.