Kobelco SK200-10 · Air Conditioner · 74 part numbers

Illustration reproduced from the Kobelco SK200-10 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.
This page lists all 74 part numbers in the Kobelco SK200-10 Air Conditioner. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. The list comes straight from the Kobelco SK200-10 catalogue for this machine family.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN20M00172F1 | CONDITIONER, AIR | ||
| 1 | LQ20M00089F1 | CONDITIONER ASSY | 1 |
| 2 | YX91V00001F1 | COMPRESSOR, AIR | 1 |
| 2 1 - | LC91V00001S002 | PLATE | 1 |
| 2 2 - | YN91V01001S002 | PLATE | 1 |
| 2 3 - | YN91V01001S003 | ROTOR | 1 |
| 2 4 - | LC91V00001S004 | ACCESSORIES | 1 |
| 2 5 - | YN91V01001S005 | COVER | 1 |
| 2 6 - | YN91V01001S006 | COVER | 1 |
| 2 7 - | YN91V01001S007 | RING ASSY | 1 |
| 3 | LQ20M01327F1 | CONDENSER | 1 |
| 3 1 - | LQ20M01327S001 | CONDENSER | 1 |
| 3 2 - | YT20M01215S002 | RUBBER | 4 |
| 3 3 - | YT20M01215S003 | COLLAR | 4 |
| 4 | YN20M01696F1 | PULLEY ASSY | 1 |
| 5 | LQ50V01009P1 | FILTER | 1 |
| 6 | LQ20M01375P1 | PANEL | 1 |
| 8 | YN20M01494D1 | V BELT - | 1 |
| 9 | YN20M01939P1 | BRACKET | 1 |
| 10 | YN20M01941P1 | BRACKET | 1 |
| 11 | YN20M01682P1 | BRACKET | 1 |
| 12 | LQ20M01361P1 | BRACKET | 1 |
| 12 | LQ20M01414P1 | BRACKET | 1 |
| 13 | HX11W08320DX | HOSE | 1 |
| 14 | HX11W08220DX | HOSE | 1 |
| 14 | HX11W08230DX | HOSE | 1 |
| 15 | YN20M01492D8 | HOSE | 1 |
| 16 | YN20M01046DS | TUBE | 1 |
| 17 | YN20M01046D6 | TUBE | 1 |
| 17 | YN20M01046DP | TUBE | 1 |
| 18 | LQ20M01131DH | TUBE | 1 |
| 19 | 2418Z1333D37 | TUBE | 2 |
| 20 | 2418Z1333D1 | TUBE | 1 |
| 21 | YN20M01094D5 | TUBE | 1 |
| 22 | LQ20M01370P1 | TUBE | 1 |
| 23 | LC20M01126P1 | CONNECTOR | 1 |
| 24 | ZM73C10025 | SEMS BOLT - | 6 |
| 25 | ZM73C08025 | SEMS BOLT - | 10 |
| 26 | ZM73C10040 | SEMS BOLT - | 2 |
| 27 | ZM73C10020 | SEMS BOLT - | 1 |
| 28 | LQ20M01371P1 | CLIP | 4 |
| 29 | LQ20M01372P1 | CLIP | 2 |
| 30 | PY01P01043D5 | CLIP | 23 |
| 31 | PY01P01043D3 | CLIP | 18 |
| 32 | YN13E01375P1 | CLIP | 6 |
| 33 | ZC46X16011 | CLIP | 1 |
| 35 | ZS18C08100 | CAPSCREW | 4 |
| 36 | ZS18C08030 | CAPSCREW | 4 |
| 37 | ZS18C08025 | CAPSCREW | 2 |
| 38 | ZW16P08000 | WASHER | 6 |
| 39 | PV01P01007P1 | WASHER | 4 |
| 40 | LQ20M01379P1 | INSULATION | 1 |
| 43 | YY20M01169P1 | BRACKET | 1 |
| 44 | ZM73C06020 | SEMS BOLT - | 2 |
| 45 | YN20M01751P1 | CLIP | 1 |
| 46 | YN20M01752P1 | CLIP | 1 |
| 47 | ZM73C10030 | SEMS BOLT - | 1 |
| 48 | LQ20M01407F1 | HOSE ASSY | 1 |
| 48 1 - | LQ20M01407S001 | HOSE ASSY | 1 |
| 48 2 - | 2445Z1604D4 | O RING - | 2 |
| 48 3 - | YN20M01726P1 | CAP | 1 |
| 49 | LQ20M01408F1 | HOSE ASSY | 1 |
| 49 1 - | LQ20M01408S001 | HOSE ASSY | 1 |
| 49 2 - | 2445Z1604D6 | O RING - | 2 |
| 50 | LQ20M01409F1 | HOSE ASSY | 1 |
| 50 1 - | LQ20M01409S001 | HOSE ASSY | 1 |
| 51 | YN20M01864F1 | HOSE ASSY | 1 |
| 51 1 - | YN20M01864S001 | HOSE ASSY | 1 |
| 51 2 - | 2445Z1604D5 | O RING - | 2 |
| 51 3 - | YN20M01725P1 | CAP | 1 |
| 52 | YN20M01954P1 | CAPSCREW | 2 |
| 53 | YN20M01955P1 | CAPSCREW | 2 |
| 54 | LQ54S00005P1 | RECEIVER | 1 |
| 55 | YN20M01469P1 | BRACKET | 1 |
Kobelco SK200-10 excavator part numbers, taken from the machine's own parts catalogue. Items shared with neighbouring machine generations are confirmed from your model plate before quoting.
Read as a dataset, the 74 part numbers spread across 20 number series (YN20M, LQ20M, ZM73C being the biggest) The list is weighted toward repeated items such as hose, tube, clip and 21 hardware positions.
If you are quoting from this group, start with: PY01P01043D5 (clip, ×23 per assembly); PY01P01043D3 (clip, ×18 per assembly); ZM73C08025 (sems bolt -, ×10 per assembly). The full list follows below.
Every item is quoted with its condition declared — genuine via original supply channels, or a quality OEM alternative — on the quotation itself.
The Air Conditioner group on the Kobelco SK200-10 contains 74 separately orderable part numbers, listed in the table below with quantity per assembly.
Yes — O-rings, seals and clamps are all listed individually, which is what allows a proper seal replacement rather than an improvised repair. The practical first number to ask for in this group is PY01P01043D5.
Yes — orders consolidate into one shipment, and freight is quoted once for the consolidated parcel.
Yes — cab and climate orders combine naturally since the parts live in the same area of the machine and ship well together.
Kobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.