Kobelco SK200-10 · Battery Assembly · 9 part numbers
No illustration for this section
The Battery Assembly is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Battery Assembly group on the Kobelco SK200-10 contains 9 separately orderable part numbers. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. The list comes straight from the Kobelco SK200-10 catalogue for this machine family.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LQ72E00009F1 | BATTERY ASSY | ||
| 1 | LQ72E00008F1 | BATTERY INSTAL | 1 |
| 2 | YN72S00014P1 | BATTERY | 2 |
| 1 | YN72E01033P2 | COVER | 1 |
| 2 | YN72E01055P1 | PLATE | 1 |
| 3 | R20T0084D17 | CAPSCREW | 2 |
| 4 | ZW26X10000 | LOCK WASHER | 2 |
| 5 | ZN18C10008 | NUT | 1 |
| 6 | 2418T12346 | WASHER | 1 |
Part numbers as fitted to the Kobelco SK200-10 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Structurally, these 9 numbers fall into 7 Kobelco number series — LQ72E, YN72E, YN72S among the largest. The list is weighted toward repeated items such as battery, washer, instal and 4 hardware positions.
The high-quantity positions are: YN72S00014P1 (battery, ×2 per assembly); R20T0084D17 (capscrew, ×2 per assembly); ZW26X10000 (lock washer, ×2 per assembly). The full list follows below.
Electrical diagnosis on the Kobelco SK200-10 starts with the circuit, not the part — but once the circuit is isolated, the fix is usually a single item from this group: a sensor, a relay, a connector or a short harness section.
Each component carries its own Kobelco part number, from the assembly level down to individual connectors and relays. Working from the drawing callouts and the Ref. column keeps the diagnosis and the order aligned.
Some do. Machine-side electrical changed across the production run, so send the serial number and we confirm the correct part before quoting. If that matches your case, quote YN72S00014P1 and we will take it from there.
Intermittent faults still end at a part number — send the symptom pattern and the serial, and we will suggest the positions in this group most often responsible.
Cranking-but-no-start traces through the fuel shut-off, sensors and relays in this group. Send the symptoms and serial number and we will indicate the likely part numbers.
Remote Control Piping (Sensor Group)
View Parts ListStopper Control Piping (Sensor Group)
View Parts ListController Mounting
View Parts ListController Mounting
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.