Kobelco SK200-10 Cab Wiring Harness — Group 2 — Exploded View & Part Numbers

Kobelco SK200-10 · Cab Wiring Harness — Group 2 · 16 part numbers

Illustration reproduced from the Kobelco SK200-10 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK200-10

Cab Wiring Harness — Group 2

Below is the complete Kobelco SK200-10 Cab Wiring Harness — Group 2 — 16 part numbers with the quantity fitted per assembly. Where the drawing shows a callout, the Ref. column in the table carries the same number. All numbers are taken from the machine's own parts catalogue — nothing here is generic.

• 16 part numbers in this group, all listed below
• Kobelco SK200-10 excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

Structurally, these 16 numbers fall into 7 Kobelco number series — YN14E, PY01P, YN13E among the largest. In practice that means repeated items such as harness, clip, cab and 5 hardware positions.

If you are quoting from this group, start with: PY01P01043D3 (clip, ×23 per assembly); YN13E01375P1 (clip, ×12 per assembly); PY01P01043D5 (clip, ×8 per assembly). The full list follows below.

Electrical diagnosis on the Kobelco SK200-10 starts with the circuit, not the part — but once the circuit is isolated, the fix is usually a single item from this group: a sensor, a relay, a connector or a short harness section.

Each component carries its own Kobelco part number, from the assembly level down to individual connectors and relays. Working from the drawing callouts and the Ref. column keeps the diagnosis and the order aligned.