Kobelco SK200-10 · Hydraulic Oil Tank Mounting · 38 part numbers
No illustration for this section
The Hydraulic Oil Tank Mounting is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Below is the complete Kobelco SK200-10 Hydraulic Oil Tank Mounting — 38 part numbers with the quantity fitted per assembly. Take the callout number from the drawing and match it in the Ref. column below. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN33H00199F1 | TANK INSTAL, HYD | ||
| 1 | YN33H00200F1 | TANK ASSY, HYD | 1 |
| 1 | YN33H00200F2 | TANK ASSY, HYD | 1 |
| 2 | YN33H00201F1 | TANK INSTAL, HYD | 1 |
| 1 | YN33H00202P1 | TANK | 1 |
| 2 | YN33H01259P2 | COVER | 1 |
| 3 | YN33H01465P1 | COVER | 1 |
| 4 | LQ50V00004F1 | STRAINER, SUCTION | 1 |
| 4 1 - | YN50V00002S001 | STRAINER | 1 |
| 4 2 - | 2446R110S2 | HOLDER | 1 |
| 4 3 - | LS50V00007S006 | BOLT | 1 |
| 4 4 - | ZN11C10008 | NUT | 2 |
| 4 5 - | 2446R110S6 | SPRING | 1 |
| 5 | YN57V00012F1 | BREATHER ASSY | 1 |
| 5 2 - | YN57V00010S002 | ELEMENT, FILTER | 1 |
| 5 2 - | YN57V00012S002 | ELEMENT, FILTER | 1 |
| 5 4 - | YN57V00012S004 | SEAL | 2 |
| 5 5 - | YN57V00012S005 | NUT | 1 |
| 5 6 - | 2446U260S10 | NUT | 1 |
| 5 7 - | 2446U260S8 | PACKING | 1 |
| 6 | YN58S00009F1 | GAUGE, LEVEL, OIL | 1 |
| 7 | YN52V01025F1 | ELEMENT, FILTER | 1 |
| 7 1 - | YN52V01026P1 | ELEMENT, FILTER | 1 |
| 7 2 - | YN21V00025P1 | VALVE, CHECK | 1 |
| 7 3 - | LC33H01009P1 | SPRING | 1 |
| 8 | ZE72X08000 | PLUG | 1 |
| 9 | ZM73C10025 | SEMS BOLT - | 12 |
| 10 | YN33H01304P1 | SEMS BOLT - | 4 |
| 11 | ZD11G19000 | O RING - | 2 |
| YN52V01025R110 | REPAIR KIT | 1 | |
| 12 | YN33H00218P1 | TANK | 1 |
| 1 | ZS18C20045 | CAPSCREW | 4 |
| 2 | ZW16H20000 | WASHER | 4 |
| 3 | HY25X24050G1 | SHIM (1.0) | 3 |
| 4 | HY25X24050G4 | SHIM (1.6) | 3 |
| 5 | HY25X24050G5 | SHIM (2.3) | 3 |
| 6 | YN64H01391D1 | CAP | 2 |
| 7 | PX64H01010D1 | CAP | 2 |
Listed for the Kobelco SK200-10 excavator. Every number can be quoted on its own or as a complete set, and fitment is confirmed from your machine serial before we price it.
Structurally, these 38 numbers fall into 20 Kobelco number series — YN33H, YN57V, YN52V among the largest. Expect repeated items such as tank, hyd, element and 9 hardware positions when you work through it.
Three numbers worth noting first: ZM73C10025 (sems bolt -, ×12 per assembly); YN33H01304P1 (sems bolt -, ×4 per assembly); ZS18C20045 (capscrew, ×4 per assembly). The full list follows below.
Rebuild-at-component-level is the practical route for most Kobelco SK200-10 hydraulic assemblies. Wear shows up at predictable points — spool clearances, valve plates, bearing sets, seal packages — and those items are listed individually, so you can quote only what is worn instead of exchanging the complete unit.
Seal kits for this group are quoted from the same table — the O-ring and seal positions carry their own numbers, so a hydraulic repair never forces a purchase at assembly level.
Both. Every quotation states the condition of each item — genuine through original supply channels, or a quality OEM alternative — so the choice is yours and it is documented. On the Kobelco SK200-10, that usually comes back to ZM73C10025 (sems bolt -) in this group.
We quote new components from this table — genuine or OEM by declaration — rather than exchange units, so you know exactly what is being fitted.
Slow or drifting functions, a circuit that weakens as the oil warms, noise under load, and external leakage at joints are the usual reports. Pressure testing points to the circuit; the drawing callouts then point to the part.
Swing Motor Mounting
View Parts ListValve Mounting (Emergency Lowering Valve)
View Parts ListValve Mounting (Boom Emergency Lowering Valve)
View Parts ListPump Hydraulic Piping
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.