Kobelco SK200-10 Upper Frame Wiring Harness — Group 2 — Exploded View & Part Numbers

Kobelco SK200-10 · Upper Frame Wiring Harness — Group 2 · 35 part numbers

Illustration reproduced from the Kobelco SK200-10 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK200-10

Upper Frame Wiring Harness — Group 2

Every part number in the Kobelco SK200-10 Upper Frame Wiring Harness — Group 2 is listed here — 35 of them, with quantities. Take the callout number from the drawing and match it in the Ref. column below. The list comes straight from the Kobelco SK200-10 catalogue for this machine family.

• 35 part numbers in this group, all listed below
• Kobelco SK200-10 excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

The 35 entries group into 12 distinct number series, led by YN13E, LQ13E. Expect repeated items such as clip, cable, bracket and 18 hardware positions when you work through it.

If you are quoting from this group, start with: PY01P01043D3 (clip, ×108 per assembly); YN13E01375P1 (clip, ×38 per assembly); ZM73C08020 (sems bolt -, ×20 per assembly). The full list follows below.

Send the Kobelco SK200-10 serial number with the fault description. Machine-side electrical changed across the production run on some variants, and the serial number confirms the correct part before you order.

Electrical faults on the Kobelco SK200-10 — a gauge that will not read, a machine that will not crank, a harness rub-through — are diagnosed by circuit, and the fix usually comes down to one part number from this group rather than a complete rewire.