Kobelco SK200-10 · Upper Frame Wiring Harness (Floor Plate) — Group 2 · 15 part numbers

Illustration reproduced from the Kobelco SK200-10 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.
This page lists all 15 part numbers in the Kobelco SK200-10 Upper Frame Wiring Harness (Floor Plate) — Group 2. Callout numbers on the exploded view map one-to-one to the Ref. column in the table. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN13E00298F1 | HARNESS ASSY, UPP | ||
| 1 | YN13E02082P1 | HARNESS | 1 |
| 1 | YN13E02082P3 | HARNESS | 1 |
| 1 | YN13E02082P4 | HARNESS | 1 |
| 1 | YN13E02082P5 | HARNESS | 1 |
| 2 | LE13E01005P1 | CABLE | 1 |
| 3 | ZW16P08000 | WASHER | 1 |
| 4 | ZW26X08000 | LOCK WASHER | 1 |
| 5 | ZN18C08007 | NUT | 1 |
| 6 | YN13E01375P1 | CLIP | 25 |
| 7 | PY01P01043D3 | CLIP | 37 |
| 8 | PY01P01043D8 | CLIP | 1 |
| 9 | PY01P01043DA | CLIP | 4 |
| 10 | PM22C01020DR | TRIM | 1 |
| 11 | PY01P01043D5 | CLIP | 1 |
Listed for the Kobelco SK200-10 excavator. Every number can be quoted on its own or as a complete set, and fitment is confirmed from your machine serial before we price it.
Read as a dataset, the 15 part numbers spread across 7 number series (YN13E, PY01P, LE13E being the biggest) In practice that means repeated items such as harness, clip, washer and 8 hardware positions.
Three numbers worth noting first: PY01P01043D3 (clip, ×37 per assembly); YN13E01375P1 (clip, ×25 per assembly); PY01P01043DA (clip, ×4 per assembly). The full list follows below.
Electrical faults on the Kobelco SK200-10 — a gauge that will not read, a machine that will not crank, a harness rub-through — are diagnosed by circuit, and the fix usually comes down to one part number from this group rather than a complete rewire.
Electrical diagnosis on the Kobelco SK200-10 starts with the circuit, not the part — but once the circuit is isolated, the fix is usually a single item from this group: a sensor, a relay, a connector or a short harness section.
Send us the part number or a photo. Our coverage runs to 100,000+ part numbers available to order — this page lists one group, not the whole machine. On the Kobelco SK200-10, that usually comes back to PY01P01043D3 (clip) in this group.
Yes. Connectors, relays and switches all carry their own part numbers in the table above, so a single connector repair can be quoted without a harness.
Yes — electrical items are compact and consolidate easily into an existing shipment.
Remote Control Piping (Sensor Group)
View Parts ListStopper Control Piping (Sensor Group)
View Parts ListController Mounting
View Parts ListController Mounting
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.