Kobelco SK260LC-12M · 1.6M3 Bucket Assembly · 19 part numbers
No illustration for this section
The 1.6M3 Bucket Assembly is listed without an exploded view in the SK260LC-12M catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
19 separately orderable part numbers make up the 1.6M3 Bucket Assembly on the Kobelco SK260LC-12M. Where the drawing shows a callout, the Ref. column in the table carries the same number. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LB61B00051F1 | BUCKET ASSY, 1.6M3 | ||
| 1 | LB61B00052F1 | BUCKET ASSY | 1 |
| 1 1 - | LB61B00053F1 | BUCKET ASSY | 1 |
| 1 1A - | LB61B00054P1 | BUCKET | 1 |
| 1 -1Ar | LB69B01009P1 | EDGE, CUTTING | 1 |
| 1 -1As | LC61B01259P1 | ADAPTER | 5 |
| 1 1At - | LC61B01315P1 | ADAPTER | 4 |
| 1 1B - | LC69B00004F1 | TOOTH ASSY | 5 |
| 1 -1Ba | LC69B01049P1 | TOOTH | 1 |
| 1 1Bb - | LC69B01050P1 | PIN ASSY | 1 |
| 1 1C - | LC69B00005P1 | CUTTER, SIDE | 2 |
| 1 1D - | ZS13C24070 | CAPSCREW | 10 |
| 1 1E - | ZN13C24019 | NUT | 10 |
| 1 2 - | LB61B01108P1 | PLATE ASSY | 1 |
| 1 2C - | LQ61B01546P1 | BAR, FLAT | 1 |
| 1 2D - | YN61B01834P1 | BAR, FLAT | 1 |
| 1 2E - | LQ61B01549P1 | BAR, FLAT | 1 |
| 1 2F - | LB61B01114P1 | BAR, FLAT | 1 |
| 1 2G - | LQ61B01510P1 | BAR, FLAT | 1 |
Factory part numbers as fitted to the Kobelco SK260LC-12M excavator. "Ref." matches the callout number on the exploded view where one is shown.
Read as a dataset, the 19 part numbers spread across 8 number series (LB61B, LC69B, LQ61B being the biggest) In practice that means repeated items such as bar, flat, bucket and 2 hardware positions.
Where to start in this table: ZS13C24070 (capscrew, ×10 per assembly); ZN13C24019 (nut, ×10 per assembly); LC61B01259P1 (adapter, ×5 per assembly). The full list follows below.
Items in this group are quoted with the condition declared — genuine through original supply channels, or a quality OEM alternative. For heavy sections the freight is quoted separately so you can see the landed cost before committing.
The 1.6M3 Bucket Assembly group on the Kobelco SK260LC-12M contains 19 separately orderable part numbers. The table below lists each one with its quantity per assembly, taken directly from the machine's own parts catalogue.
We supply genuine parts ordered through original supply channels, and quality OEM alternatives where that is the practical choice. The condition of every item is declared on the quotation. In this group, ZS13C24070 is the number most often quoted for that enquiry.
If the boom, arm or bucket was changed after delivery, tell us the attachment part number as well as the machine serial — the numbers must match the attachment actually fitted.
On several Kobelco SK260LC-12M variants they do — pin and bushing part numbers changed with the attachment configuration. Send the serial number and we confirm the correct group before quoting.
Upper Frame Assembly
View Parts ListCounterweight Mounting (Tropical Spec, 4.90T, Eagle-Eye View Ready)
View Parts ListCounterweight Mounting (Tropical Spec, Semi-Heavy 5.70T, Eagle-Eye View Ready)
View Parts ListArm Rest
View Parts ListFilter List
View Parts ListUndercarriage Parts List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListKobelco SK260LC-12M workshop guide
Read the guideKobelco SK260LC-12M workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK260LC-12M — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.