Kobelco SK260LC-12M · 1.6M3 Bucket Assembly (Semi-HD) · 20 part numbers
No illustration for this section
The 1.6M3 Bucket Assembly (Semi-HD) is listed without an exploded view in the SK260LC-12M catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Every part number in the Kobelco SK260LC-12M 1.6M3 Bucket Assembly (Semi-HD) is listed here — 20 of them, with quantities. Where the drawing shows a callout, the Ref. column in the table carries the same number. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LB61B00071F1 | BUCKET ASSY, 1.6M3 | ||
| 1 | LB61B00072F1 | BUCKET ASSY | 1 |
| 1 1 - | LB61B00073F1 | BUCKET ASSY | 1 |
| 1 1A - | LB61B00074P1 | BUCKET | 1 |
| 1 -1Ap | LB69B01013P1 | EDGE, CUTTING | 1 |
| 1 -1Ar | LQ61B01649P1 | ADAPTER | 5 |
| 1 1B - | LQ69B00010F1 | TOOTH ASSY | 5 |
| 1 -1Ba | LQ69B01051P1 | TOOTH | 1 |
| 1 1Bb - | LQ69B01054P1 | PIN | 1 |
| 1 -1Bc | LQ69B01055P1 | RETAINER | 1 |
| 1 1C - | YN69B00021P1 | CUTTER, SIDE | 2 |
| 1 1D - | ZS13C24065 | CAPSCREW | 6 |
| 1 1E - | ZN13C24019 | NUT | 6 |
| 1 2 - | LB61B01176P1 | PLATE ASSY | 1 |
| 1 2B - | LB61B01178P1 | PLATE | 1 |
| 1 2C - | LB61B01179P1 | PLATE | 1 |
| 1 2D - | LB61B01180P1 | PLATE | 1 |
| 1 2E - | LB61B01181P1 | PLATE | 1 |
| 1 2F - | LB61B01182P1 | PLATE | 1 |
| 1 2G - | LQ61B01166P1 | BAR | 4 |
Listed for the Kobelco SK260LC-12M excavator. Every number can be quoted on its own or as a complete set, and fitment is confirmed from your machine serial before we price it.
The 20 entries group into 7 distinct number series, led by LB61B, LQ69B. Expect repeated items such as plate, bucket, tooth and 2 hardware positions when you work through it.
Three numbers worth noting first: ZS13C24065 (capscrew, ×6 per assembly); ZN13C24019 (nut, ×6 per assembly); LQ61B01649P1 (adapter, ×5 per assembly). The full list follows below.
Send the Kobelco SK260LC-12M serial number with your enquiry. Pin and bushing positions changed across the production run on several Kobelco SK260LC-12M variants, and the serial number is the fastest way to confirm the correct set before you order.
Structural groups rarely fail as castings; what wears is everything pinned, bolted and clamped to them. That is what makes this group the practical one to work from — pins, bushings, retaining hardware and the mounting points that take the working load every cycle of the machine.
Yes — hardware is the cheapest line in the order and the most expensive to revisit, so a joint rebuild normally includes fresh clips, shims and bolts. On the Kobelco SK260LC-12M, that usually comes back to ZS13C24065 (capscrew) in this group.
We supply genuine parts ordered through original supply channels, and quality OEM alternatives where that is the practical choice. The condition of every item is declared on the quotation.
If the boom, arm or bucket was changed after delivery, tell us the attachment part number as well as the machine serial — the numbers must match the attachment actually fitted.
Upper Frame Assembly
View Parts ListCounterweight Mounting (Tropical Spec, 4.90T, Eagle-Eye View Ready)
View Parts ListCounterweight Mounting (Tropical Spec, Semi-Heavy 5.70T, Eagle-Eye View Ready)
View Parts ListArm Rest
View Parts ListFilter List
View Parts ListUndercarriage Parts List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListKobelco SK260LC-12M workshop guide
Read the guideKobelco SK260LC-12M workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK260LC-12M — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.