Kobelco SK260LC-12M · 1.6M3 Bucket Assembly (Wide, Shallow, Horizontal Pin Type) · 21 part numbers
No illustration for this section
The 1.6M3 Bucket Assembly (Wide, Shallow, Horizontal Pin Type) is listed without an exploded view in the SK260LC-12M catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The 1.6M3 Bucket Assembly (Wide, Shallow, Horizontal Pin Type) group on the Kobelco SK260LC-12M contains 21 separately orderable part numbers. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LB61B00079F1 | BUCKET ASSY, 1.6M3 | ||
| 1 | LB61B00080F1 | BUCKET ASSY | 1 |
| 1 1 - | LB61B00081F1 | BUCKET ASSY | 1 |
| 1 1A - | LB61B00082P1 | BUCKET ASSY | 1 |
| 1 -1Ar | LB69B01009P1 | EDGE, CUTTING | 1 |
| 1 -1As | LC61B02078P1 | ADAPTER | 5 |
| 1 1At - | LC61B02084P1 | ADAPTER | 4 |
| 1 1B - | LC69B00020F1 | TOOTH ASSY | 5 |
| 1 -1Ba | LC69B01116P1 | TOOTH | 1 |
| 1 1Bb - | LC69B01117P1 | PIN ASSY | 1 |
| 1 1C - | LC69B00005P1 | CUTTER, SIDE | 2 |
| 1 1D - | ZS13C24070 | CAPSCREW | 10 |
| 1 1E - | ZN13C24019 | NUT | 10 |
| 1 2 - | LB61B01108P1 | PLATE ASSY | 1 |
| 1 2A - | LB61B01109P1 | PLATE | 2 |
| 1 2B - | LB61B01110P1 | PLATE | 2 |
| 1 2C - | LQ61B01546P1 | BAR, FLAT | 1 |
| 1 2D - | YN61B01834P1 | BAR, FLAT | 1 |
| 1 2E - | LQ61B01549P1 | BAR, FLAT | 1 |
| 1 2F - | LB61B01114P1 | BAR, FLAT | 1 |
| 1 2G - | LQ61B01510P1 | BAR, FLAT | 1 |
Part numbers as fitted to the Kobelco SK260LC-12M excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Structurally, these 21 numbers fall into 8 Kobelco number series — LB61B, LC69B, LQ61B among the largest. Expect repeated items such as bar, flat, bucket and 2 hardware positions when you work through it.
The high-quantity positions are: ZS13C24070 (capscrew, ×10 per assembly); ZN13C24019 (nut, ×10 per assembly); LC61B02078P1 (adapter, ×5 per assembly). The full list follows below.
Undercarriage and structural wear is progressive: play at a joint, a knocking sound on direction change, oval wear on a pin. Because each position carries its own part number, worn positions can be replaced individually instead of ordering the complete group.
Where the attachment configuration differs — long boom, heavy-duty arm, alternative bucket — the pin and bushing numbers change with it. The serial number on the machine is the reliable way to pick the right line from this table.
HD marks the heavy-duty version of the attachment, which uses its own pin and bushing part numbers that do not interchange with the standard version. Confirm which version the machine carries before ordering. If that matches your case, quote ZS13C24070 and we will take it from there.
Yes — hardware is the cheapest line in the order and the most expensive to revisit, so a joint rebuild normally includes fresh clips, shims and bolts.
We supply genuine parts ordered through original supply channels, and quality OEM alternatives where that is the practical choice. The condition of every item is declared on the quotation.
Upper Frame Assembly
View Parts ListCounterweight Mounting (Tropical Spec, 4.90T, Eagle-Eye View Ready)
View Parts ListCounterweight Mounting (Tropical Spec, Semi-Heavy 5.70T, Eagle-Eye View Ready)
View Parts ListArm Rest
View Parts ListFilter List
View Parts ListUndercarriage Parts List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListKobelco SK260LC-12M workshop guide
Read the guideKobelco SK260LC-12M workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK260LC-12M — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.