Kobelco SK260LC-12M · Arm Assembly (SK260, SK280) · 23 part numbers
No illustration for this section
The Arm Assembly (SK260, SK280) is listed without an exploded view in the SK260LC-12M catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Every part number in the Kobelco SK260LC-12M Arm Assembly (SK260, SK280) is listed here — 23 of them, with quantities. Take the callout number from the drawing and match it in the Ref. column below. The list comes straight from the Kobelco SK260LC-12M catalogue for this machine family.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LQ12B00958F1 | ARM GROUP | ||
| 1 | LQ12B11188F1 | LINK, BUCKET | 1 |
| 1 2 - | YN12B02403P1 | BUSHING | 2 |
| 1 3 - | LQ12B01601P1 | BUSHING | 2 |
| 2 | LQ12B02086P1 | LINK | 1 |
| 3 | LQ12B01519P1 | LINK | 1 |
| 4 | LQ12B02054P1 | PIN | 2 |
| 5 | LQ12B02053P1 | PIN | 1 |
| 6 | LQ12B02052P1 | PIN | 1 |
| 7 | HS18C20145G2 | CAPSCREW | 2 |
| 9 | ZN18C20016 | NUT | 4 |
| 10 | 2445R220D6 | SEAL, DUST | 2 |
| 11 | 2445R220D4 | SEAL, DUST | 4 |
| 12 | ZG91S02000 | NIPPLE, GREASE | 5 |
| 13 | ZG91S04000 | NIPPLE, GREASE | 2 |
| 14 | B16T0442D57 | SHIM (0.5) | 1 |
| 15 | B16T0442D44 | SHIM (0.9) | 1 |
| 16 | B16T0442D2 | SHIM (1.6) | 1 |
| 17 | YN12B01122D1 | SHIM (0.5) | 2 |
| 18 | YN12B01122D2 | SHIM (0.9) | 2 |
| 19 | YN12B01122D3 | SHIM (1.6) | 2 |
| 20 | YN12B01601D1 | SHIM (2.0) | 4 |
| 21 | YN12B01602D1 | SHIM (2.0) | 2 |
Kobelco SK260LC-12M excavator part numbers, taken from the machine's own parts catalogue. Items shared with neighbouring machine generations are confirmed from your model plate before quoting.
The 23 entries group into 7 distinct number series, led by LQ12B, YN12B. Expect repeated items such as shim, link, pin and 2 hardware positions when you work through it.
If you are quoting from this group, start with: ZG91S02000 (nipple, grease, ×5 per assembly); ZN18C20016 (nut, ×4 per assembly); 2445R220D4 (seal, dust, ×4 per assembly). The full list follows below.
The callout numbers on the exploded view map one-to-one to the Ref. column in the parts table. Identify the joint or component on the drawing, take its number from the table, and the quotation you receive will match the drawing exactly.
Rebuilding a joint takes the machine out of service once, so it pays to consolidate: pins, bushings, retaining rings and the joint seals quoted together, arriving as one kit rather than in several parcels.
Yes. Send the serial number and which joints are loose, and we assemble the pin, bushing and hardware list into one quotation with everything consolidated into a single shipment. The practical first number to ask for in this group is ZG91S02000.
They are the catalogue quantities per assembly — the number of that item fitted to one complete group, which is exactly how a rebuild order is planned.
Compact heavy items such as pins travel by air or courier; larger sections go by sea with crating and bracing. Freight is quoted separately so the landed cost is visible upfront.
Upper Frame Assembly
View Parts ListCounterweight Mounting (Tropical Spec, 4.90T, Eagle-Eye View Ready)
View Parts ListCounterweight Mounting (Tropical Spec, Semi-Heavy 5.70T, Eagle-Eye View Ready)
View Parts ListArm Rest
View Parts ListFilter List
View Parts ListUndercarriage Parts List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListKobelco SK260LC-12M workshop guide
Read the guideKobelco SK260LC-12M workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK260LC-12M — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.