Kobelco SK260LC-12M · Upper Frame Electric Assembly · 30 part numbers
No illustration for this section
The Upper Frame Electric Assembly is listed without an exploded view in the SK260LC-12M catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
30 separately orderable part numbers make up the Upper Frame Electric Assembly on the Kobelco SK260LC-12M. Take the callout number from the drawing and match it in the Ref. column below. The list comes straight from the Kobelco SK260LC-12M catalogue for this machine family.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LB03E00004F1 | ELEC ASSY, UPP | ||
| 1 | LB03E01011P1 | CABLE | 1 |
| 2 | LB03E01010P1 | CABLE | 1 |
| 3 | LC53S00001D2 | HORN | 1 |
| 4 | LC53S00001D1 | HORN | 1 |
| 5 | YN03E01306P1 | BRACKET | 1 |
| 6 | YN03E01290P1 | BRACKET | 1 |
| 6 4 - | YF22C01290P1 | HINGE | 1 |
| 7 | YN03E01297P1 | COVER | 1 |
| 8 | ZS16C03012 | CAPSCREW | 2 |
| 10 | ZS16C03018 | CAPSCREW | 2 |
| 11 | ZS18C06016 | CAPSCREW | 1 |
| 12 | PY01P01043D3 | CLIP | 6 |
| 13 | YN13E01375P1 | CLIP | 5 |
| 14 | ZW26X03000 | LOCK WASHER | 4 |
| 15 | YN24S00017P1 | RELAY | 1 |
| 16 | ZM61C05020 | SEMS BOLT - | 2 |
| 17 | ZM73C08020 | SEMS BOLT - | 13 |
| 18 | ZM61C04016 | SEMS BOLT - | 2 |
| 19 | ZN18C06005 | NUT | 1 |
| 20 | YN50S00062P1 | SWITCH | 1 |
| 20 17 - | YN50S01011P1 | KEY | 1 |
| 21 | YN50S00058P1 | SWITCH, LIMIT | 1 |
| 22 | YN53S00007D1 | BUZZER | 1 |
| 23 | 2427P1836D25 | STRIP, WEATHER | 1 |
| 24 | LS03E01052P1 | RUBBER | 1 |
| 25 | YN03E01309P1 | RUBBER | 1 |
| 26 | YN03E01293P1 | RUBBER | 2 |
| 27 | 2432Z451 | CATCH | 1 |
| 28 | HX85A00003DX | TRIM | 1 |
Part numbers as fitted to the Kobelco SK260LC-12M excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Read as a dataset, the 30 part numbers spread across 19 number series (YN03E, LB03E, YN50S being the biggest) Expect repeated items such as capscrew, sems, bolt and 10 hardware positions when you work through it.
The high-quantity positions are: ZM73C08020 (sems bolt -, ×13 per assembly); PY01P01043D3 (clip, ×6 per assembly); YN13E01375P1 (clip, ×5 per assembly). The full list follows below.
Connector and terminal items in this group are the small parts that end most wiring repairs. They are inexpensive, so they are worth adding to any order as spares for the same machine.
Where no illustration exists for this section, the parts table below is the authoritative list — the callout numbering refers to the machine's own catalogue, and every entry is a real Kobelco part number.
By part number — the catalogue lists harness sections as complete numbered items, and that is how we quote them. If that matches your case, quote ZM73C08020 and we will take it from there.
Both are available. For sensors and switches we usually recommend genuine through original supply channels; the quotation states the condition of every line item either way.
Yes — relays, fuses and terminals are listed individually and are commonly ordered in small quantities as machine spares.
Lever Grip Assembly (Left Horn / Right Boost)
View Parts ListRemote Control Piping (Sensor Group)
View Parts ListStopper Control Piping (Sensor Group)
View Parts ListController Mounting (Inside Cab)
View Parts ListFilter List
View Parts ListUndercarriage Parts List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListKobelco SK260LC-12M workshop guide
Read the guideKobelco SK260LC-12M workshop guide
Read the guideKobelco SK260LC-12M workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK260LC-12M — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.