Kobelco SK260LC-12M · Wiring Harness (Display Control) · 8 part numbers
No illustration for this section
The Wiring Harness (Display Control) is listed without an exploded view in the SK260LC-12M catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Every part number in the Kobelco SK260LC-12M Wiring Harness (Display Control) is listed here — 8 of them, with quantities. Where the drawing shows a callout, the Ref. column in the table carries the same number. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LS11E00115F1 | HARNESS ASSY | ||
| 1 | LS11E01186P1 | HARNESS | 1 |
| 1 | LS11E01186P2 | HARNESS | 1 |
| 2 | PY01P01043D3 | CLIP | 23 |
| 3 | YN13E01375P1 | CLIP | 7 |
| 4 | YT11E01043P1 | CLIP | 1 |
| 5 | YN54S01009P1 | CABLE | 1 |
| 6 | YY11E01263P1 | CABLE | 1 |
Listed for the Kobelco SK260LC-12M excavator. Every number can be quoted on its own or as a complete set, and fitment is confirmed from your machine serial before we price it.
The 8 entries group into 6 distinct number series, led by LS11E, PY01P. In practice that means repeated items such as harness, clip, cable and 3 hardware positions.
Three numbers worth noting first: PY01P01043D3 (clip, ×23 per assembly); YN13E01375P1 (clip, ×7 per assembly); LS11E01186P1 (harness, ×1 per assembly). The full list follows below.
Each component carries its own Kobelco part number, from the assembly level down to individual connectors and relays. Working from the drawing callouts and the Ref. column keeps the diagnosis and the order aligned.
Connector and terminal items in this group are the small parts that end most wiring repairs. They are inexpensive, so they are worth adding to any order as spares for the same machine.
Intermittent faults still end at a part number — send the symptom pattern and the serial, and we will suggest the positions in this group most often responsible. On the Kobelco SK260LC-12M, that usually comes back to PY01P01043D3 (clip) in this group.
Cranking-but-no-start traces through the fuel shut-off, sensors and relays in this group. Send the symptoms and serial number and we will indicate the likely part numbers.
Usually yes — a photo plus the machine serial number lets us match the connector or sensor against the catalogue.
Lever Grip Assembly (Left Horn / Right Boost)
View Parts ListRemote Control Piping (Sensor Group)
View Parts ListStopper Control Piping (Sensor Group)
View Parts ListController Mounting (Inside Cab)
View Parts ListFilter List
View Parts ListUndercarriage Parts List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListKobelco SK260LC-12M workshop guide
Read the guideKobelco SK260LC-12M workshop guide
Read the guideKobelco SK260LC-12M workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK260LC-12M — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.