Kobelco excavator parts specialist since 2007 — Guangzhou, China WhatsApp / WeChat: +86 181 4482 5432 · Tel: +86 20-32036036 · kobelco-parts@foxmail.com
Blog

Kobelco Machines on Landscaping and Sports-Field Work: Parts That Decide the Finish

Golf greens, sports pitches and residential grades punish the wrong machine size. Guangzhou Shenyue Machinery Technology Co., Ltd. explains the parts that hold a finish.

Blog / Kobelco Machines on Landscaping and Sports-F…
November 13, 2026 · Shenyue Kobelco Parts Team
Track chain assembly from stock, the undercarriage choice that decides ground pressure on turf
A track chain assembly from our stock. On finished turf the shoe, not the bucket, decides how much repair work follows the machine.

Landscaping looks like light work until a machine leaves ruts in a completed grade. Sports fields, golf features and residential plots are built to tolerances measured in millimetres, on surfaces that must survive the machine that built them. The parts that matter here are not the biggest ones in the catalogue; they are the ones that control ground pressure, reach and the last five centimetres of cut. Guangzhou Shenyue Machinery Technology Co., Ltd. supplies contractors who work this way, and the pattern in their orders is consistent.

Why a twenty-tonne machine is the wrong tool

A twenty-tonne excavator can grade, but it cannot do so on a finished lawn without leaving a repair bill. Weight per shoe decides everything on soft ground, and a large machine also needs more room to swing than a suburban plot allows. The machines that win this work are compact and short-radius: the SK60-8 and SK75-8 for tight plots and trench lines, the SK130 and SK140LC for sports-field earthworks and larger residential grades. The compact and short-radius guide explains how the tail swing affects what the machine can reach without closing a lane.

Size bands that actually work

Machine bandTypical useParts that wear first
3–5 tonne (SK60-8 class)Backyard grades, trench lines, tight accessBucket pins, rubber pads, blade edge
6–8 tonne (SK75-8 class)Sports-field shaping, cart paths, drainageTrack chain, idlers, bucket linkage
13–14 tonne (SK130 / SK140LC)Bulk earthworks before finish gradeArm bushings, cutting edges, track shoes

Ground pressure and the finished surface

On turf the undercarriage is the part that decides whether the client accepts the job. Steel shoes dig in on a wet pitch; rubber pads or road-liner pads spread the load and protect the surface, at the cost of faster wear on abrasive cart paths. Track tension matters more than usual, because a loose chain climbs the sprocket on turns and tears the surface it is standing on. Our pad selection guide covers the trade-off between grip and surface damage, and chain tension deserves a weekly check because a loose chain climbs the sprocket on turns and tears the surface it stands on.

The attachment chain that sets the finish

Three attachments do most of the work: a wide grading bucket with a bolt-on edge, a tiltrotator where the contractor owns one, and a dozer blade on the compact machines. The grading bucket controls the cut; the tiltrotator controls the cross-fall without repositioning; the blade handles the bulk spread before the bucket ever touches the grade. Grade control then removes the operator error that no attachment can fix — our grade control guide covers the sensors and displays involved. Whether a tiltrotator can be added at all depends on the auxiliary plumbing and the control pattern, so it is worth confirming both before the attachment is ordered.

Wear items that decide cost per square metre

Fine grading is a high-cycle, low-load job: the bucket moves constantly and travels little. That pattern wears pins and bushings faster than it wears teeth. The arm bushing we record under LC12B02199P1 is a typical replacement on this duty, and play at the bucket linkage shows up as a wavy finish long before it becomes a noise. Cutting edges wear evenly but quickly on sandy soil, and track chain wear accelerates on abrasive paths between plots. Keeping a spare pin and bushing set on site is cheaper than losing a day to a bucket that will not hold grade.

Selection rule: choose the lightest machine that can carry the bucket the finish requires, then choose the shoe for the surface, not for the yard. Guangzhou Shenyue Machinery Technology Co., Ltd. quotes pads, pins and edges together so the machine arrives ready for the surface it will work on.

Buying for this work

Orders from landscaping contractors are usually small and repetitive: a set of pads, two bushings, a cutting edge, a handful of filters. That is a poor fit for suppliers who only sell in container loads, and a good fit for a stock held in part types rather than in complete machines. Model specifications for the compact and mid-size ranges are published by Kobelco at kobelco.co.jp, and the matching parts are grouped in our catalogue. Send the machine plate with the first enquiry and the repeat orders become a two-line message, which is how Guangzhou Shenyue Machinery Technology Co., Ltd. keeps a five-machine landscaping fleet supplied without a stockroom on site.

Frequently Asked Questions

Which Kobelco size is best for sports-field grading?

The 6–8 tonne class, such as the SK75-8, suits most sports-field shaping, while the 13–14 tonne SK130 and SK140LC handle bulk earthworks before finish grade. Guangzhou Shenyue Machinery Technology Co., Ltd. recommends matching the machine to the surface, not to the largest bucket it can lift.

Do rubber pads or steel shoes suit landscaping work?

Rubber or road-liner pads protect finished turf and paved surfaces, while steel shoes grip better on soft ground but damage the finish. Many contractors keep one machine on pads for the final pass and use steel shoes for the bulk work.

What wears fastest on a grading machine?

Pins and bushings wear faster than teeth because the bucket cycles constantly with little travel. The arm bushing recorded under LC12B02199P1 is a common replacement, and play there shows up as a wavy finish.

Can you supply small repeat orders for a landscaping fleet?

Yes. Guangzhou Shenyue Machinery Technology Co., Ltd. holds 3,000+ part types on the shelf and can quote mixed orders of pads, pins, edges and filters in one shipment, which suits contractors who order monthly rather than by the container.

Need the parts this article talks about?

Send your part numbers and a photo of the nameplate — real photos and pricing come back with the quote.

Start an Inquiry