Kobelco SK200-10 · 0.8M3 Bucket Assembly · 15 part numbers
No illustration for this section
The 0.8M3 Bucket Assembly is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Below is the complete Kobelco SK200-10 0.8M3 Bucket Assembly — 15 part numbers with the quantity fitted per assembly. Take the callout number from the drawing and match it in the Ref. column below. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN61B00548F1 | BUCKET ASSY, 0.8M3 | ||
| 1 | YN61B00549F1 | BUCKET ASSY | 1 |
| 1 1 - | YN61B00550F1 | BUCKET ASSY | 1 |
| 1 1A - | YN61B00551P2 | BUCKET | 1 |
| 1 -1As | YN69B01104P1 | EDGE, CUTTING | 1 |
| 1 1At - | YN61B01020P1 | ADAPTER | 5 |
| 1 1B - | YN69B00008F1 | TOOTH ASSY | 5 |
| 1 -1Ba | YN69B00008S001 | TOOTH | 1 |
| 1 1Bb - | YN69B00008S002 | PIN | 1 |
| 1 -1Bc | YN69B00008S003 | SPRING | 1 |
| 1 1C - | YN69B00010P1 | CUTTER, SIDE | 1 |
| 1 1D - | YN69B00011P1 | CUTTER, SIDE | 1 |
| 1 1E - | ZS13C24065 | CAPSCREW | 8 |
| 1 1F - | ZN13C24019 | NUT | 8 |
| 1 2 - | YN61B00441P1 | BUCKET | 1 |
Listed for the Kobelco SK200-10 excavator. Every number can be quoted on its own or as a complete set, and fitment is confirmed from your machine serial before we price it.
Structurally, these 15 numbers fall into 4 Kobelco number series — YN69B, YN61B, ZS13C among the largest. The list is weighted toward repeated items such as bucket, tooth, cutter and 2 hardware positions.
Three numbers worth noting first: ZS13C24065 (capscrew, ×8 per assembly); ZN13C24019 (nut, ×8 per assembly); YN61B01020P1 (adapter, ×5 per assembly). The full list follows below.
The 0.8M3 Bucket Assembly group on the Kobelco SK200-10 contains 15 separately orderable part numbers. The table below lists each one with its quantity per assembly, taken directly from the machine's own parts catalogue.
Send the Kobelco SK200-10 serial number with your enquiry. Pin and bushing positions changed across the production run on several Kobelco SK200-10 variants, and the serial number is the fastest way to confirm the correct set before you order.
Compact heavy items such as pins travel by air or courier; larger sections go by sea with crating and bracing. Freight is quoted separately so the landed cost is visible upfront. On the SK200-10, that usually comes back to ZS13C24065 (capscrew) in this group.
Yes — retaining rings, shims and bolts are all listed in this group, and a joint rebuild quotation includes them by default.
Yes. Pins, bushings and retaining hardware are all listed separately, so a single worn joint can be quoted on its own.
Upper Frame Assembly
View Parts ListUpper Frame Assembly
View Parts ListCounterweight Mounting
View Parts ListTrack Idler Assembly
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.