Kobelco SK200-10 · Upper Frame Assembly — Group 2 · 27 part numbers
No illustration for this section
The Upper Frame Assembly — Group 2 is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Kobelco SK200-10 Upper Frame Assembly — Group 2 breaks down into 27 individually orderable part numbers. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN52F00953F1 | FRAME GROUP, UPP | ||
| 1 | YN52F02796P1 | SEAL | 1 |
| 2 | YN52F01615P1 | PLATE | 1 |
| 3 | ZC16X14800 | CLIP | 1 |
| 4 | ZM73C10025 | SEMS BOLT - | 8 |
| 5 | YN52F03092P1 | PLATE | 1 |
| 6 | YN52F03094P1 | PACKING | 1 |
| 7 | YN52F01100D3 | CAPSCREW | 32 |
| 8 | HS53C20105G1 | CAPSCREW | 1 |
| 9 | ZW13H20000 | WASHER | 1 |
| 10 | ZS18F24130 | CAPSCREW | 1 |
| 11 | ZN18F24019 | NUT | 1 |
| 12 | ZM73C12020 | SEMS BOLT - | 2 |
| 13 | YN52F02750P1 | GROMMET | 1 |
| 14 | YN52F02751P1 | GROMMET | 1 |
| 15 | YN52F02752P1 | GROMMET | 1 |
| 15 | YN52F11143P1 | GROMMET | 1 |
| 16 | YN52F02753P1 | GROMMET | 1 |
| 17 | YN52F03259P1 | GROMMET | 1 |
| 18 | YN52F03000P1 | INSULATION | 1 |
| 19 | YN52F03202P1 | INSULATION | 1 |
| 20 | LQ52F01754P1 | INSULATION | 1 |
| 21 | YN52F03005P1 | RUBBER | 1 |
| 22 | YN20T02785P1 | PLATE | 1 |
| 23 | YN52F03185P1 | PLATE | 1 |
| 24 | ZM73C10030 | SEMS BOLT - | 2 |
| 25 | PV02B01073D2 | CAP | 6 |
Factory part numbers as fitted to the Kobelco SK200-10 excavator. "Ref." matches the callout number on the exploded view where one is shown.
The 27 entries group into 10 distinct number series, led by YN52F, ZM73C. Expect repeated items such as grommet, plate, sems and 9 hardware positions when you work through it.
Where to start in this table: YN52F01100D3 (capscrew, ×32 per assembly); ZM73C10025 (sems bolt -, ×8 per assembly); PV02B01073D2 (cap, ×6 per assembly). The full list follows below.
The callout numbers on the exploded view map one-to-one to the Ref. column in the parts table. Identify the joint or component on the drawing, take its number from the table, and the quotation you receive will match the drawing exactly.
Rebuilding a joint takes the machine out of service once, so it pays to consolidate: pins, bushings, retaining rings and the joint seals quoted together, arriving as one kit rather than in several parcels.
Yes — retaining rings, shims and bolts are all listed in this group, and a joint rebuild quotation includes them by default. In this group, YN52F01100D3 is the number most often quoted for that enquiry.
Yes. Pins, bushings and retaining hardware are all listed separately, so a single worn joint can be quoted on its own.
HD marks the heavy-duty version of the attachment, which uses its own pin and bushing part numbers that do not interchange with the standard version. Confirm which version the machine carries before ordering.
Upper Frame Assembly
View Parts ListCounterweight Mounting
View Parts ListTrack Idler Assembly
View Parts ListTrack Idler Assembly
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.