Kobelco SK200-10 · 1.0M3 Bucket Assembly · 16 part numbers
No illustration for this section
The 1.0M3 Bucket Assembly is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
16 separately orderable part numbers make up the 1.0M3 Bucket Assembly on the Kobelco SK200-10. Take the callout number from the drawing and match it in the Ref. column below. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN61B00544F1 | BUCKET ASSY, 1.0M3 | ||
| 1 | YN61B00545F1 | BUCKET ASSY | 1 |
| 1 1 - | YN61B00546F1 | BUCKET ASSY | 1 |
| 1 1A - | YN61B00547P1 | BUCKET | 1 |
| 1 -1As | YN69B01100P1 | EDGE, CUTTING | 1 |
| 1 1At - | YN61B01020P1 | ADAPTER | 5 |
| 1 1A - | YN61B00547P2 | BUCKET | 1 |
| 1 1B - | YN69B00008F1 | TOOTH ASSY | 5 |
| 1 -1Ba | YN69B00008S001 | TOOTH | 1 |
| 1 1Bb - | YN69B00008S002 | PIN | 1 |
| 1 -1Bc | YN69B00008S003 | SPRING | 1 |
| 1 1C - | YN69B00010P1 | CUTTER, SIDE | 1 |
| 1 1D - | YN69B00011P1 | CUTTER, SIDE | 1 |
| 1 1E - | ZS13C24065 | CAPSCREW | 8 |
| 1 1F - | ZN13C24019 | NUT | 8 |
| 1 2 - | YN61B00436P1 | BUCKET | 1 |
Part numbers as fitted to the Kobelco SK200-10 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Read as a dataset, the 16 part numbers spread across 4 number series (YN61B, YN69B, ZS13C being the biggest) The list is weighted toward repeated items such as bucket, tooth, cutter and 2 hardware positions.
The high-quantity positions are: ZS13C24065 (capscrew, ×8 per assembly); ZN13C24019 (nut, ×8 per assembly); YN61B01020P1 (adapter, ×5 per assembly). The full list follows below.
Rebuilding a joint takes the machine out of service once, so it pays to consolidate: pins, bushings, retaining rings and the joint seals quoted together, arriving as one kit rather than in several parcels.
Undercarriage and structural wear is progressive: play at a joint, a knocking sound on direction change, oval wear on a pin. Because each position carries its own part number, worn positions can be replaced individually instead of ordering the complete group.
They are the catalogue quantities per assembly — the number of that item fitted to one complete group, which is exactly how a rebuild order is planned. If that matches your case, quote ZS13C24065 and we will take it from there.
Compact heavy items such as pins travel by air or courier; larger sections go by sea with crating and bracing. Freight is quoted separately so the landed cost is visible upfront.
Yes — retaining rings, shims and bolts are all listed in this group, and a joint rebuild quotation includes them by default.
Upper Frame Assembly
View Parts ListUpper Frame Assembly
View Parts ListCounterweight Mounting
View Parts ListTrack Idler Assembly
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.