Kobelco SK200-10 · 2.94M Arm · 11 part numbers
No illustration for this section
The 2.94M Arm is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Below is the complete Kobelco SK200-10 2.94M Arm — 11 part numbers with the quantity fitted per assembly. Where the drawing shows a callout, the Ref. column in the table carries the same number. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN12B10541F1 | ARM, 2.94M | ||
| 1 | YN12B10542F1 | ARM | 1 |
| 1 1B - | YN12B11184P1 | BUSHING | 2 |
| 1 1C - | YN12B02404P1 | BUSHING | 2 |
| 1 1D - | YN12B11831P1 | BUSHING | 2 |
| 1 2A - | YN12B11706P1 | BLOCK, TAPPED | 2 |
| 1 2B - | YN02B02285P1 | BLOCK, TAPPED | 4 |
| 1 | YN12B12049F1 | ARM | 1 |
| 2 | 2445R220D4 | SEAL, DUST | 2 |
| 3 | 2445R220D3 | SEAL, DUST | 2 |
| 4 | 2445R138D8 | SEAL, DUST | 2 |
Kobelco SK200-10 excavator part numbers, taken from the machine's own parts catalogue. Items shared with neighbouring machine generations are confirmed from your model plate before quoting.
Structurally, these 11 numbers fall into 3 Kobelco number series — YN12B, 2445R, YN02B among the largest. The list is weighted toward repeated items such as arm, bushing, seal and 3 seal and O-ring positions.
If you are quoting from this group, start with: YN02B02285P1 (block, tapped, ×4 per assembly); YN12B11184P1 (bushing, ×2 per assembly); YN12B02404P1 (bushing, ×2 per assembly). The full list follows below.
The 2.94M Arm group on the Kobelco SK200-10 contains 11 separately orderable part numbers. The table below lists each one with its quantity per assembly, taken directly from the machine's own parts catalogue.
Send the Kobelco SK200-10 serial number with your enquiry. Pin and bushing positions changed across the production run on several Kobelco SK200-10 variants, and the serial number is the fastest way to confirm the correct set before you order.
If the boom, arm or bucket was changed after delivery, tell us the attachment part number as well as the machine serial — the numbers must match the attachment actually fitted. The practical first number to ask for in this group is YN02B02285P1.
On several SK200-10 variants they do — pin and bushing part numbers changed with the attachment configuration. Send the serial number and we confirm the correct group before quoting.
Yes — we cover the Kobelco range beyond the SK200-10. Send the model or the part number from the worn part and we will identify and quote it.
Upper Frame Assembly
View Parts ListUpper Frame Assembly
View Parts ListCounterweight Mounting
View Parts ListTrack Idler Assembly
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.