Kobelco SK200-10 · 5.65M Backhoe Boom (Manual, Hydraulic Crusher & Breaker) · 14 part numbers
No illustration for this section
The 5.65M Backhoe Boom (Manual, Hydraulic Crusher & Breaker) is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Below is the complete Kobelco SK200-10 5.65M Backhoe Boom (Manual, Hydraulic Crusher & Breaker) — 14 part numbers with the quantity fitted per assembly. Where the drawing shows a callout, the Ref. column in the table carries the same number. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN02B00795F1 | BOOM, HOE 5.65M | ||
| 1 | YN02B00796F1 | BOOM, HOE | 1 |
| 1 1B - | LB01V01009P1 | BUSHING | 4 |
| 1 2A - | YN02B02285P1 | BLOCK, TAPPED | 2 |
| 1 2B - | LQ02B01785P1 | BLOCK, TAPPED | 6 |
| 1 2C - | LQ02B01870P1 | BLOCK, TAPPED | 2 |
| 1 2C - | LQ02B01870P2 | BLOCK, TAPPED | 2 |
| 1 2D - | 2416T9878 | BLOCK, TAPPED | 2 |
| 1 2E - | YN02B02302P1 | BLOCK, TAPPED | 1 |
| 1 2E - | LC52F02262P1 | BLOCK, TAPPED | 1 |
| 1 2F - | YN02B01882P1 | BLOCK, TAPPED | 2 |
| 1 | YN02B00942F1 | BOOM, HOE | 1 |
| 1 2K - | YN02B02596P1 | BLOCK, TAPPED | 1 |
| 2 | 2445R138D8 | SEAL, DUST | 2 |
Kobelco SK200-10 excavator part numbers, taken from the machine's own parts catalogue. Items shared with neighbouring machine generations are confirmed from your model plate before quoting.
Structurally, these 14 numbers fall into 6 Kobelco number series — YN02B, LQ02B, LB01V among the largest. Expect repeated items such as block, tapped, boom and 1 seal and O-ring positions when you work through it.
If you are quoting from this group, start with: LQ02B01785P1 (block, tapped, ×6 per assembly); LB01V01009P1 (bushing, ×4 per assembly); YN02B02285P1 (block, tapped, ×2 per assembly). The full list follows below.
Rebuild-at-component-level is the practical route for most Kobelco SK200-10 hydraulic assemblies. Wear shows up at predictable points — spool clearances, valve plates, bearing sets, seal packages — and those items are listed individually, so you can quote only what is worn instead of exchanging the complete unit.
Seal kits for this group are quoted from the same table — the O-ring and seal positions carry their own numbers, so a hydraulic repair never forces a purchase at assembly level.
The machine serial number, the part number if you have it, and the symptom. With those three, fitment is confirmed and the quotation follows the same working day. The practical first number to ask for in this group is LQ02B01785P1.
Yes. Seal items are listed as individual part numbers in the table, so a seal package for one joint can be quoted without buying the whole assembly.
Either. The complete 5.65M Backhoe Boom (Manual, Hydraulic Crusher & Breaker) can be quoted as a set, or any single part number from the table — both are normal requests from our trade customers.
Hydraulic Oil Tank Mounting
View Parts ListSwing Motor Mounting
View Parts ListValve Mounting (Emergency Lowering Valve)
View Parts ListValve Mounting (Boom Emergency Lowering Valve)
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.