Kobelco SK200-10 5.65M Boom Hydraulic Piping — Group 2 — Exploded View & Part Numbers

Kobelco SK200-10 · 5.65M Boom Hydraulic Piping — Group 2 · 43 part numbers

Illustration reproduced from the Kobelco SK200-10 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK200-10

5.65M Boom Hydraulic Piping — Group 2

This page lists all 43 part numbers in the Kobelco SK200-10 5.65M Boom Hydraulic Piping — Group 2. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. All numbers are taken from the machine's own parts catalogue — nothing here is generic.

• 43 part numbers in this group, all listed below
• Kobelco SK200-10 excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

Read as a dataset, the 43 part numbers spread across 13 number series (YN42H, ZE13X, ZD12P being the biggest) Expect repeated items such as tube, clamp, ring and 9 hardware positions when you work through it.

If you are quoting from this group, start with: ZM73C12035 (sems bolt -, ×18 per assembly); ZW16H12000 (washer, ×10 per assembly); YN42H02363P1 (clamp, ×6 per assembly). The full list follows below.

For workshops planning a full hydraulic health check, the practical sequence is seals first, then wear items such as valve plates and bushings, and only then complete assemblies. The table below supports that sequence because every level of the breakdown is separately orderable.

Rebuild-at-component-level is the practical route for most Kobelco SK200-10 hydraulic assemblies. Wear shows up at predictable points — spool clearances, valve plates, bearing sets, seal packages — and those items are listed individually, so you can quote only what is worn instead of exchanging the complete unit.