Kobelco SK200-10 · Arm Mounting · 20 part numbers
No illustration for this section
The Arm Mounting is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
This page lists all 20 part numbers in the Kobelco SK200-10 Arm Mounting. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN12B10607F1 | ARM INSTAL | ||
| 1 | YN12B10608F1 | ARM INSTAL | 1 |
| 2 | YN12B10595F1 | ARM INSTAL | 1 |
| 1 | YN12B11620P1 | PIN | 1 |
| 1 | YN12B11620P2 | PIN | 1 |
| 2 | 2418T17550 | PLATE | 1 |
| 2 | LQ12B02099P1 | PLATE | 1 |
| 3 | ZS18C16030 | CAPSCREW | 1 |
| 3 | ZS18C16035 | CAPSCREW | 1 |
| 4 | ZW16H16000 | WASHER | 1 |
| 5 | YN02B01414D1 | SHIM (2.0) | 2 |
| 6 | B16T0442D53 | SHIM (0.5) | 1 |
| 7 | B16T0442D40 | SHIM (0.9) | 1 |
| 1 | YN02B02474P1 | PIN | 1 |
| 2 | HS18C16150G2 | CAPSCREW | 1 |
| 3 | ZN18C16013 | NUT | 2 |
| 4 | YN02B01415D1 | SHIM (2.0) | 2 |
| 5 | B16T0442D78 | SHIM (0.5) | 1 |
| 6 | B16T0442D77 | SHIM (0.9) | 1 |
| 7 | B16T0442D62 | SHIM (1.6) | 1 |
Kobelco SK200-10 excavator part numbers, taken from the machine's own parts catalogue. Items shared with neighbouring machine generations are confirmed from your model plate before quoting.
Read as a dataset, the 20 part numbers spread across 9 number series (YN12B, B16T, YN02B being the biggest) The list is weighted toward repeated items such as shim, arm, instal and 5 hardware positions.
If you are quoting from this group, start with: YN02B01414D1 (shim (2.0), ×2 per assembly); ZN18C16013 (nut, ×2 per assembly); YN02B01415D1 (shim (2.0), ×2 per assembly). The full list follows below.
Structural groups rarely fail as castings; what wears is everything pinned, bolted and clamped to them. That is what makes this group the practical one to work from — pins, bushings, retaining hardware and the mounting points that take the working load every cycle of the machine.
Structural repairs are usually planned against measured wear rather than a fixed interval. Pins and bushings are the items to measure first; the retaining hardware in this group is cheap to replace at the same time and is worth adding to the same shipment.
Yes. Pins, bushings and retaining hardware are all listed separately, so a single worn joint can be quoted on its own. The practical first number to ask for in this group is YN02B01414D1.
HD marks the heavy-duty version of the attachment, which uses its own pin and bushing part numbers that do not interchange with the standard version. Confirm which version the machine carries before ordering.
Yes — hardware is the cheapest line in the order and the most expensive to revisit, so a joint rebuild normally includes fresh clips, shims and bolts.
Upper Frame Assembly
View Parts ListUpper Frame Assembly
View Parts ListCounterweight Mounting
View Parts ListTrack Idler Assembly
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.