Kobelco SK200-10 · Control Box Assembly · 28 part numbers
No illustration for this section
The Control Box Assembly is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
28 separately orderable part numbers make up the Control Box Assembly on the Kobelco SK200-10. Take the callout number from the drawing and match it in the Ref. column below. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN03M00535F1 | CONTROL BOX ASSY | ||
| 1 | YN03M02679P1 | BRACKET ASSY | 1 |
| 2 | YN03M02626P1 | CONTROL BOX | 1 |
| 2 | YN03M02793P1 | CONTROL BOX | 1 |
| 3 | YN03M02623F1 | CONTROL BOX | 1 |
| 3 1 - | YN03M02624P2 | CONTROL BOX | 1 |
| 3 2 - | 2405R312D1410 | BUSHING | 2 |
| 3 2 - | YN03M02802P1 | BUSHING | 2 |
| 4 | YN03M02558P2 | BRACKET | 1 |
| 5 | YN50S00058P1 | SWITCH, LIMIT | 1 |
| 6 | YN03M02555P1 | TUBE | 1 |
| 7 | YN03M02485P1 | SPRING | 1 |
| 8 | YN03M02530F1 | LEVER ASSY | 1 |
| 8 1 - | YN03M02531P1 | LEVER | 1 |
| 8 2 - | YN03M02482P1 | GRIP | 1 |
| 8 3 - | ZS41C04014 | MACHINESCREW | 1 |
| 9 | YN03M02728P1 | PLATE ASSY | 1 |
| 10 | YN03M02535P1 | SHAFT | 1 |
| 10 | YN03M02764P1 | SHAFT | 1 |
| 11 | ZM66C06016 | SEMS BOLT - | 2 |
| 12 | ZM73C08020 | SEMS BOLT - | 8 |
| 13 | ZS23C06016 | CAPSCREW | 2 |
| 14 | ZW26K06000 | LOCK WASHER | 4 |
| 15 | ZS16C03018 | CAPSCREW | 2 |
| 16 | ZW26X03000 | LOCK WASHER | 2 |
| 17 | ZS23C06022 | CAPSCREW | 2 |
| 18 | ZM73C06016 | SEMS BOLT - | 1 |
| 19 | YN03M02573P1 | BLOCK | 1 |
Part numbers as fitted to the Kobelco SK200-10 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Read as a dataset, the 28 part numbers spread across 10 number series (YN03M, ZM73C, ZS23C being the biggest) The list is weighted toward repeated items such as control, box, sems and 9 hardware positions.
The high-quantity positions are: ZM73C08020 (sems bolt -, ×8 per assembly); ZW26K06000 (lock washer, ×4 per assembly); 2405R312D1410 (bushing, ×2 per assembly). The full list follows below.
Every item is quoted with the condition declared: genuine through original supply channels, or a quality OEM alternative. The declaration is on the quotation, not buried in the invoice.
The Control Box Assembly group on the Kobelco SK200-10 contains 28 separately orderable part numbers. The table below lists every one with its quantity per assembly, from the machine's own parts catalogue.
Cables and rods are catalogue items with fixed part numbers rather than cut-to-length — the serial number confirms the correct length variant. If that matches your case, quote ZM73C08020 and we will take it from there.
They are cheap to consolidate. Add them to any existing order and they travel in the same parcel at effectively no extra freight.
Linkage items may need basic adjustment at the joint — the parts themselves are drop-in, and our team can flag anything that needs attention at order time.
Control Levers
View Parts ListControl Box Assembly
View Parts ListPedal Assembly (1 Pedal)
View Parts ListLever Grip Assembly
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.