Kobelco SK200-10 · Control Box Assembly — Group 2 · 25 part numbers
No illustration for this section
The Control Box Assembly — Group 2 is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Every part number in the Kobelco SK200-10 Control Box Assembly — Group 2 is listed here — 25 of them, with quantities. Take the callout number from the drawing and match it in the Ref. column below. The list comes straight from the Kobelco SK200-10 catalogue for this machine family.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN03M00566F1 | CONTROL BOX ASSY | ||
| 1 | YN03M02937P1 | BRACKET ASSY | 1 |
| 2 | YN03M03057P1 | CONTROL BOX | 1 |
| 2 | YN03M03135P1 | CONTROL BOX | 1 |
| 3 | YN03M03105F1 | CONTROL BOX | 1 |
| 3 1 - | YN03M03106P1 | CONTROL BOX | 1 |
| 3 2 - | YN03M02802P1 | BUSHING | 2 |
| 4 | YN50S00058P1 | SWITCH, LIMIT | 1 |
| 5 | YN03M02555P1 | TUBE | 1 |
| 5 | YN03M02555P2 | TUBE | 1 |
| 6 | YN03M02485P1 | SPRING | 1 |
| 7 | YN03M02530F1 | LEVER ASSY | 1 |
| 7 1 - | YN03M02531P1 | LEVER | 1 |
| 7 2 - | YN03M02482P1 | GRIP | 1 |
| 7 3 - | ZS41C04014 | MACHINESCREW | 1 |
| 8 | YN03M02728P1 | PLATE ASSY | 1 |
| 9 | YN03M02764P1 | SHAFT | 1 |
| 10 | ZM73C08025 | SEMS BOLT - | 8 |
| 11 | ZM73C06016 | SEMS BOLT - | 1 |
| 12 | ZS23C06016 | CAPSCREW | 2 |
| 13 | ZS23C06022 | CAPSCREW | 2 |
| 14 | ZS16C03018 | CAPSCREW | 2 |
| 15 | ZW26K06000 | LOCK WASHER | 4 |
| 16 | ZW26X03000 | LOCK WASHER | 2 |
| 17 | YN03M02573P1 | BLOCK | 1 |
Kobelco SK200-10 excavator part numbers, taken from the machine's own parts catalogue. Items shared with neighbouring machine generations are confirmed from your model plate before quoting.
The 25 entries group into 8 distinct number series, led by YN03M, ZM73C. Expect repeated items such as control, box, capscrew and 8 hardware positions when you work through it.
If you are quoting from this group, start with: ZM73C08025 (sems bolt -, ×8 per assembly); ZW26K06000 (lock washer, ×4 per assembly); YN03M02802P1 (bushing, ×2 per assembly). The full list follows below.
The callout numbers on the exploded view map to the Ref. column in the table. Where this section has no illustration, the parts table is the authoritative list.
Lever feel is restored by replacing pins, bushings and springs at the worn joints — all listed individually here, so the repair is scoped by feel and measurement rather than by guesswork.
Yes. Send a photo of the worn part with the serial number and we will match it against this group and quote it. The practical first number to ask for in this group is ZM73C08025.
Cables and rods are catalogue items with fixed part numbers rather than cut-to-length — the serial number confirms the correct length variant.
They are cheap to consolidate. Add them to any existing order and they travel in the same parcel at effectively no extra freight.
Control Levers
View Parts ListControl Box Assembly
View Parts ListPedal Assembly (1 Pedal)
View Parts ListLever Grip Assembly
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.