Kobelco SK200-10 · Cylinder Hydraulic Piping (Bucket) · 15 part numbers
No illustration for this section
The Cylinder Hydraulic Piping (Bucket) is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Kobelco SK200-10 Cylinder Hydraulic Piping (Bucket) breaks down into 15 individually orderable part numbers. Callout numbers on the exploded view map one-to-one to the Ref. column in the table. The list comes straight from the Kobelco SK200-10 catalogue for this machine family.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN43H00167F1 | HYD LINES, CYLINDER | ||
| 1 | YN43H01572P1 | TUBE | 1 |
| 2 | YX42H01074P2 | BAND | 1 |
| 3 | YN43H01639P1 | BAND | 1 |
| 3 | YN43H02070P1 | BAND | 1 |
| 4 | YN43H01097P1 | CLAMP | 1 |
| 5 | ZG91S02000 | NIPPLE, GREASE | 1 |
| 6 | ZG91U02000 | NIPPLE, GREASE | 1 |
| 7 | ZD12P02600 | O RING - | 1 |
| 8 | ZD12A01800 | O RING - | 1 |
| 9 | ZS18C10030 | CAPSCREW | 2 |
| 10 | ZS18C10055 | CAPSCREW | 1 |
| 11 | ZS28C10030 | CAPSCREW | 4 |
| 12 | ZW26X10000 | LOCK WASHER | 2 |
| 13 | ZW16H10000 | WASHER | 1 |
Part numbers as fitted to the Kobelco SK200-10 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
The 15 entries group into 10 distinct number series, led by YN43H, ZS18C. In practice that means repeated items such as band, capscrew, nipple and 5 hardware positions.
The high-quantity positions are: ZS28C10030 (capscrew, ×4 per assembly); ZS18C10030 (capscrew, ×2 per assembly); ZW26X10000 (lock washer, ×2 per assembly). The full list follows below.
Send us the Kobelco SK200-10 serial number together with the part number or the symptom you are chasing. We confirm fitment from the serial range before quoting, and mixed orders are consolidated into a single shipment — a set of seals does not travel in its own parcel.
Hydraulic components are the heart of the Kobelco SK200-10: main pump delivery, swing and travel drive, control valve sections and the lines and seals that connect them. When a circuit loses power, drifts under load, or runs noisy when warm, the fault is usually traced to one of the components in this group rather than to the machine as a whole.
Yes. Seal items are listed as individual part numbers in the table, so a seal package for one joint can be quoted without buying the whole assembly. If that matches your case, quote ZS28C10030 and we will take it from there.
Either. The complete Cylinder Hydraulic Piping (Bucket) can be quoted as a set, or any single part number from the table — both are normal requests from our trade customers.
In most cases yes. The wear points on SK200-10 hydraulic assemblies are individually replaceable and all carry their own part numbers in the table above, so a targeted repair can be quoted without exchanging the complete unit.
Hydraulic Oil Tank Mounting
View Parts ListSwing Motor Mounting
View Parts ListValve Mounting (Emergency Lowering Valve)
View Parts ListValve Mounting (Boom Emergency Lowering Valve)
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.