Kobelco SK200-10 · Lower Frame Hydraulic Piping · 20 part numbers
No illustration for this section
The Lower Frame Hydraulic Piping is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Every part number in the Kobelco SK200-10 Lower Frame Hydraulic Piping is listed here — 20 of them, with quantities. Take the callout number from the drawing and match it in the Ref. column below. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN02H00125F1 | HYD LINES, LOW | ||
| 1 | YN02H01597P1 | TUBE | 1 |
| 2 | YN02H01598P1 | TUBE | 1 |
| 3 | YN02H01599P1 | TUBE | 1 |
| 4 | YN02H01600P1 | TUBE | 1 |
| 5 | ZX23M04260 | HOSE | 2 |
| 5 | ZX23M04270 | HOSE | 2 |
| 6 | ZX22M08200 | HOSE | 2 |
| 7 | 2420Z1224D9 | HOSE | 4 |
| 7 | 2420Z1224 | HOSE | 4 |
| 8 | YN02H01511D1 | HOSE | 2 |
| 9 | YN02H01511D2 | HOSE | 2 |
| 10 | YN02H01187P1 | CLAMP | 2 |
| 11 | YN02H01188P1 | CLAMP | 2 |
| 12 | 2418T24324D2 | SPACER | 4 |
| 13 | ZS18C08040 | CAPSCREW | 4 |
| 14 | ZW16X08000 | WASHER | 4 |
| 15 | ZW26X08000 | LOCK WASHER | 4 |
| 16 | PY01P01043D5 | CLIP | 10 |
| 17 | PY01P01043D8 | CLIP | 4 |
Kobelco SK200-10 excavator part numbers, taken from the machine's own parts catalogue. Items shared with neighbouring machine generations are confirmed from your model plate before quoting.
The 20 entries group into 9 distinct number series, led by YN02H, ZX23M. The list is weighted toward repeated items such as hose, tube, clamp and 5 hardware positions.
If you are quoting from this group, start with: PY01P01043D5 (clip, ×10 per assembly); 2420Z1224D9 (hose, ×4 per assembly); 2420Z1224 (hose, ×4 per assembly). The full list follows below.
Working from the exploded view is the fastest way to order. Find the component on the drawing, note its callout number, and take the matching reference from the table — that mapping removes the guesswork that comes with describing a part over the phone or in an email.
For workshops planning a full hydraulic health check, the practical sequence is seals first, then wear items such as valve plates and bushings, and only then complete assemblies. The table below supports that sequence because every level of the breakdown is separately orderable.
Stocked items leave within one to two working days. Anything that needs ordering through supply channels is quoted with a lead time upfront, and mixed orders are consolidated for dispatch to 30+ countries. The practical first number to ask for in this group is PY01P01043D5.
It is the quantity fitted per assembly in the catalogue — useful when a job calls for more than one of the same part, such as O-rings fitted in a pack.
Both. Every quotation states the condition of each item — genuine through original supply channels, or a quality OEM alternative — so the choice is yours and it is documented.
Hydraulic Oil Tank Mounting
View Parts ListSwing Motor Mounting
View Parts ListValve Mounting (Emergency Lowering Valve)
View Parts ListValve Mounting (Boom Emergency Lowering Valve)
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.