Kobelco SK200-10 · Lower Frame Hydraulic Piping (Long Crawler) · 25 part numbers
No illustration for this section
The Lower Frame Hydraulic Piping (Long Crawler) is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Lower Frame Hydraulic Piping (Long Crawler) group on the Kobelco SK200-10 contains 25 separately orderable part numbers. Callout numbers on the exploded view map one-to-one to the Ref. column in the table. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN02H00126F1 | HYD LINES, LOW | ||
| 1 | YN02H01611P1 | TUBE | 1 |
| 2 | YN02H01612P1 | TUBE | 1 |
| 3 | YN02H01613P1 | TUBE | 1 |
| 4 | YN02H01614P1 | TUBE | 1 |
| 5 | YN02H01623P1 | TUBE | 1 |
| 6 | YN02H01624P1 | TUBE | 1 |
| 7 | YN02H01625P1 | TUBE | 1 |
| 8 | YN02H01626P1 | TUBE | 1 |
| 9 | ZX23M04280 | HOSE | 2 |
| 10 | ZX22M08210 | HOSE | 2 |
| 10 | ZX22M08220 | HOSE | 2 |
| 11 | 2420Z1224D9 | HOSE | 4 |
| 11 | 2420Z1224 | HOSE | 4 |
| 12 | YN02H01511D1 | HOSE | 2 |
| 13 | YN02H01511D2 | HOSE | 2 |
| 14 | ZA23B28000 | CONNECTOR | 4 |
| 15 | YN02H01187P1 | CLAMP | 2 |
| 16 | YN02H01188P1 | CLAMP | 2 |
| 17 | 2418T24324D2 | SPACER | 4 |
| 18 | ZS18C08040 | CAPSCREW | 4 |
| 19 | ZW16X08000 | WASHER | 4 |
| 20 | ZW26X08000 | LOCK WASHER | 4 |
| 21 | PY01P01043D5 | CLIP | 10 |
| 22 | PY01P01043D8 | CLIP | 4 |
Factory part numbers as fitted to the Kobelco SK200-10 excavator. "Ref." matches the callout number on the exploded view where one is shown.
Structurally, these 25 numbers fall into 10 Kobelco number series — YN02H, ZX22M, 2420Z among the largest. The list is weighted toward repeated items such as tube, hose, clamp and 5 hardware positions.
Where to start in this table: PY01P01043D5 (clip, ×10 per assembly); 2420Z1224D9 (hose, ×4 per assembly); 2420Z1224 (hose, ×4 per assembly). The full list follows below.
The Lower Frame Hydraulic Piping (Long Crawler) group on the Kobelco SK200-10 contains 25 separately orderable part numbers, all listed in the table below with the quantity fitted per assembly. Every number in the table is a real Kobelco part number taken from the machine's own parts catalogue, not a generic cross-reference.
Send us the Kobelco SK200-10 serial number together with the part number or the symptom you are chasing. We confirm fitment from the serial range before quoting, and mixed orders are consolidated into a single shipment — a set of seals does not travel in its own parcel.
In most cases yes. The wear points on Kobelco SK200-10 hydraulic assemblies are individually replaceable and all carry their own part numbers in the table above, so a targeted repair can be quoted without exchanging the complete unit. In this group, PY01P01043D5 is the number most often quoted for that enquiry.
Stocked items leave within one to two working days. Anything that needs ordering through supply channels is quoted with a lead time upfront, and mixed orders are consolidated for dispatch to 30+ countries.
It is the quantity fitted per assembly in the catalogue — useful when a job calls for more than one of the same part, such as O-rings fitted in a pack.
Hydraulic Oil Tank Mounting
View Parts ListSwing Motor Mounting
View Parts ListValve Mounting (Emergency Lowering Valve)
View Parts ListValve Mounting (Boom Emergency Lowering Valve)
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.