Kobelco SK200-10 · Pump Control Piping · 14 part numbers

Illustration reproduced from the Kobelco SK200-10 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.
Below is the complete Kobelco SK200-10 Pump Control Piping — 14 part numbers with the quantity fitted per assembly. Where the drawing shows a callout, the Ref. column in the table carries the same number. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN06H00152F1 | CONTROL LINES | ||
| 1 | ZX23M06044 | HOSE ASSY | 1 |
| 2 | PW32H01026DN | HOSE | 1 |
| 3 | YN50V00020F1 | FILTER, INLINE | 1 |
| 4 | LQ06H01017P1 | CONNECTOR | 1 |
| 4 1 - | ZD12P02400 | O RING - | 1 |
| 5 | 2444Z2345 | ELBOW | 1 |
| 5 1 - | ZD12P01800 | O RING - | 1 |
| 5 2 - | ZD12P01400 | O RING - | 1 |
| 6 | ZH32X06000 | ELBOW, 90 | 2 |
| 7 | LC06H01025P1 | TEE | 1 |
| 8 | ZC16X02800 | CLIP | 2 |
| 9 | ZE72X04000 | PLUG | 1 |
| 9 1 - | ZD12P01100 | O RING - | 1 |
Kobelco SK200-10 excavator part numbers, taken from the machine's own parts catalogue. Items shared with neighbouring machine generations are confirmed from your model plate before quoting.
Structurally, these 14 numbers fall into 11 Kobelco number series — ZD12P, YN06H, ZX23M among the largest. Expect repeated items such as ring, hose, elbow and 2 hardware positions when you work through it.
If you are quoting from this group, start with: ZH32X06000 (elbow, 90, ×2 per assembly); ZC16X02800 (clip, ×2 per assembly); ZX23M06044 (hose assy, ×1 per assembly). The full list follows below.
Swing, travel and implement circuits share the same pump flow on the Kobelco SK200-10, which is why a fault in one function can point back to a component listed in this group. A pressure test narrows the circuit down; the drawing then narrows it to a part number.
Working from the exploded view is the fastest way to order. Find the component on the drawing, note its callout number, and take the matching reference from the table — that mapping removes the guesswork that comes with describing a part over the phone or in an email.
The machine serial number, the part number if you have it, and the symptom. With those three, fitment is confirmed and the quotation follows the same working day. The practical first number to ask for in this group is ZH32X06000.
Yes. Seal items are listed as individual part numbers in the table, so a seal package for one joint can be quoted without buying the whole assembly.
Either. The complete Pump Control Piping can be quoted as a set, or any single part number from the table — both are normal requests from our trade customers.
Hydraulic Oil Tank Mounting
View Parts ListSwing Motor Mounting
View Parts ListValve Mounting (Emergency Lowering Valve)
View Parts ListValve Mounting (Boom Emergency Lowering Valve)
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.