Kobelco SK200-10 Return Hydraulic Piping — Exploded View & Part Numbers

Kobelco SK200-10 · Return Hydraulic Piping · 38 part numbers

Illustration reproduced from the Kobelco SK200-10 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK200-10

Return Hydraulic Piping

This page lists all 38 part numbers in the Kobelco SK200-10 Return Hydraulic Piping. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.

• 38 part numbers in this group, all listed below
• Kobelco SK200-10 excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

Read as a dataset, the 38 part numbers spread across 18 number series (YN32H, LQ32H, HM83C being the biggest) The list is weighted toward repeated items such as hose, sems, bolt and 6 hardware positions.

If you are quoting from this group, start with: HM83C12035G1 (sems bolt -, ×6 per assembly); ZD12P04800 (o ring -, ×5 per assembly); PY01P01043D5 (clip, ×5 per assembly). The full list follows below.

Hydraulic components are the heart of the Kobelco SK200-10: main pump delivery, swing and travel drive, control valve sections and the lines and seals that connect them. When a circuit loses power, drifts under load, or runs noisy when warm, the fault is usually traced to one of the components in this group rather than to the machine as a whole.

Swing, travel and implement circuits share the same pump flow on the Kobelco SK200-10, which is why a fault in one function can point back to a component listed in this group. A pressure test narrows the circuit down; the drawing then narrows it to a part number.