Kobelco SK200-10 Track Idler Assembly — Group 2 — Exploded View & Part Numbers

Kobelco SK200-10 · Track Idler Assembly — Group 2 · 26 part numbers

Illustration reproduced from the Kobelco SK200-10 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK200-10

Track Idler Assembly — Group 2

26 separately orderable part numbers make up the Track Idler Assembly — Group 2 on the Kobelco SK200-10. Where the drawing shows a callout, the Ref. column in the table carries the same number. The list comes straight from the Kobelco SK200-10 catalogue for this machine family.

• 26 part numbers in this group, all listed below
• Kobelco SK200-10 excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

Read as a dataset, the 26 part numbers spread across 14 number series (YN52D, YN54D, 2445R being the biggest) In practice that means repeated items such as idler, ring, pin and 3 hardware positions.

Where to start in this table: YN52D00117F1 (idler assy, crawler, ×2 per assembly); 2405P482 (bushing, ×2 per assembly); YN52D01065P1 (collar, ×2 per assembly). The full list follows below.

Rebuilding a joint takes the machine out of service once, so it pays to consolidate: pins, bushings, retaining rings and the joint seals quoted together, arriving as one kit rather than in several parcels.

Undercarriage and structural wear is progressive: play at a joint, a knocking sound on direction change, oval wear on a pin. Because each position carries its own part number, worn positions can be replaced individually instead of ordering the complete group.