Kobelco SK200-10 · Track Shoe Assembly (600Mm T=8.5) · 14 part numbers
No illustration for this section
The Track Shoe Assembly (600Mm T=8.5) is listed without an exploded view in the SK200-10 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Below is the complete Kobelco SK200-10 Track Shoe Assembly (600Mm T=8.5) — 14 part numbers with the quantity fitted per assembly. Take the callout number from the drawing and match it in the Ref. column below. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN60D00060F1 | SHOE ASSY | ||
| 1 | YN60D00054F1 | SHOE ASSY | 2 |
| 1 1 - | YN62D00017F1 | TRACK LINK ASSY | 1 |
| 1 1A - | 2424J170D1 | TRACK LINK | 46 |
| 1 1B - | 2424J170D2 | TRACK LINK | 46 |
| 1 1C - | 2405P694 | BUSHING | 45 |
| 1 1D - | 2419P3042 | PIN | 45 |
| 1 1E - | 2405P392 | BUSHING | 1 |
| 1 1F - | YN62D01017P1 | PIN | 1 |
| 1 1G - | 2418T25964 | COLLAR | 2 |
| 1 1H - | YN62D01028P1 | SEAL | 90 |
| 1 2 - | YN60D00044P1 | SHOE | 46 |
| 1 12 - | YN60D01007P1 | BOLT | 184 |
| 1 16 - | YN60D01006P1 | NUT | 184 |
Listed for the Kobelco SK200-10 excavator. Every number can be quoted on its own or as a complete set, and fitment is confirmed from your machine serial before we price it.
Structurally, these 14 numbers fall into 6 Kobelco number series — YN60D, YN62D, 2424J among the largest. The list is weighted toward repeated items such as shoe, track, link and 2 hardware positions.
Three numbers worth noting first: YN60D01007P1 (bolt, ×184 per assembly); YN60D01006P1 (nut, ×184 per assembly); YN62D01028P1 (seal, ×90 per assembly). The full list follows below.
Structural repairs are usually planned against measured wear rather than a fixed interval. Pins and bushings are the items to measure first; the retaining hardware in this group is cheap to replace at the same time and is worth adding to the same shipment.
The callout numbers on the exploded view map one-to-one to the Ref. column in the parts table. Identify the joint or component on the drawing, take its number from the table, and the quotation you receive will match the drawing exactly.
Compact heavy items such as pins travel by air or courier; larger sections go by sea with crating and bracing. Freight is quoted separately so the landed cost is visible upfront. On the Kobelco SK200-10, that usually comes back to YN60D01007P1 (bolt) in this group.
Yes — retaining rings, shims and bolts are all listed in this group, and a joint rebuild quotation includes them by default.
Yes. Pins, bushings and retaining hardware are all listed separately, so a single worn joint can be quoted on its own.
Upper Frame Assembly
View Parts ListUpper Frame Assembly
View Parts ListCounterweight Mounting
View Parts ListTrack Idler Assembly
View Parts ListFilter List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListPaint Colors
View Parts ListKobelco SK200-10 workshop guide
Read the guideKobelco SK200-10 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK200-10 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.