Kobelco SK240-12 · Controller Mounting (Mechatro Main Controller) · 20 part numbers
No illustration for this section
The Controller Mounting (Mechatro Main Controller) is listed without an exploded view in the SK240-12 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
This page lists all 20 part numbers in the Kobelco SK240-12 Controller Mounting (Mechatro Main Controller). The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN22E10016F1 | CONTROLLER INSTAL | ||
| 1 | LS22E01084P2 | BRACKET | 1 |
| 1 | LS22E01084P3 | BRACKET | 1 |
| 2 | YT22E01263P1 | BRACKET | 1 |
| 2 | YT22E01263P2 | BRACKET | 1 |
| 3 | LS22E01083P1 | INSULATION | 1 |
| 4 | YT50S00028D1 | SWITCH | 1 |
| 5 | LC22E01001D1 | RESISTOR | 1 |
| 6 | YN22E01445P1 | LABEL | 1 |
| 7 | YN52S00106P1 | POTENTIOMETER | 1 |
| 8 | LS22E01081P1 | BRACKET | 1 |
| 9 | HX85A20036DX | TRIM | 1 |
| 10 | ZM73C08016 | SEMS BOLT - | 9 |
| 11 | ZM61C06025 | SEMS BOLT - | 9 |
| 13 | PE21C01070DK | TRIM | 1 |
| 14 | YT22E01282P1 | BRACKET | 1 |
| 17 | ZM61C04012 | SEMS BOLT - | 1 |
| 18 | HX85A00013DY | TRIM | 2 |
| 19 | HX85A20009DX | TRIM | 1 |
| 20 | PE21C01070DB | TRIM | 1 |
Kobelco SK240-12 excavator part numbers, taken from the machine's own parts catalogue. Items shared with neighbouring machine generations are confirmed from your model plate before quoting.
Read as a dataset, the 20 part numbers spread across 10 number series (LS22E, YT22E, HX85A being the biggest) Expect repeated items such as bracket, trim, sems and 3 hardware positions when you work through it.
If you are quoting from this group, start with: ZM73C08016 (sems bolt -, ×9 per assembly); ZM61C06025 (sems bolt -, ×9 per assembly); HX85A00013DY (trim, ×2 per assembly). The full list follows below.
Electrical faults on the Kobelco SK240-12 — a gauge that will not read, a machine that will not crank, a harness rub-through — are diagnosed by circuit, and the fix usually comes down to one part number from this group rather than a complete rewire.
Electrical diagnosis on the Kobelco SK240-12 starts with the circuit, not the part — but once the circuit is isolated, the fix is usually a single item from this group: a sensor, a relay, a connector or a short harness section.
The part number from the failed sensor is fastest; failing that, the machine serial number plus the fault description lets us confirm it from the catalogue. The practical first number to ask for in this group is ZM73C08016.
Some do. Machine-side electrical changed across the production run, so send the serial number and we confirm the correct part before quoting.
Intermittent faults still end at a part number — send the symptom pattern and the serial, and we will suggest the positions in this group most often responsible.
Lever Grip Assembly (Left Horn / Right Boost)
View Parts ListRemote Control Piping (Sensor Group)
View Parts ListStopper Control Piping (Sensor Group)
View Parts ListRelay Box Assembly
View Parts ListFilter List
View Parts ListUndercarriage Parts List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListKobelco SK240-12 workshop guide
Read the guideKobelco SK240-12 workshop guide
Read the guideKobelco SK240-12 workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK240-12 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.