Kobelco SK240-12 Stopper Control Piping (Sensor Group) — Exploded View & Part Numbers

Kobelco SK240-12 · Stopper Control Piping (Sensor Group) · 25 part numbers

Illustration reproduced from the Kobelco SK240-12 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK240-12

Stopper Control Piping (Sensor Group)

The Stopper Control Piping (Sensor Group) group on the Kobelco SK240-12 contains 25 separately orderable part numbers. Callout numbers on the exploded view map one-to-one to the Ref. column in the table. All numbers are taken from the machine's own parts catalogue — nothing here is generic.

• 25 part numbers in this group, all listed below
• Kobelco SK240-12 excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

Structurally, these 25 numbers fall into 15 Kobelco number series — YN21C, 2420R, YN64H among the largest. The list is weighted toward repeated items such as hose, clip, control and 6 hardware positions.

Where to start in this table: ZM73C12025 (sems bolt -, ×7 per assembly); YN13E01375P1 (clip, ×5 per assembly); ZH22X06000 (connector, ×4 per assembly). The full list follows below.

Where no illustration exists for this section, the parts table below is the authoritative list — the callout numbering refers to the machine's own catalogue, and every entry is a real Kobelco part number.

Monitor and controller items vary by machine build, so the serial number matters more in this group than in most. Send it with the fault description and we confirm the correct variant before quoting.