Kobelco SK250-8 · Bucket Assembly,1.2M3 (1.57Cu Yd) · 28 part numbers

Illustration reproduced from the Kobelco SK250-8 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.
The Bucket Assembly,1.2M3 (1.57Cu Yd) group on the Kobelco SK250-8 contains 28 separately orderable part numbers. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LQ61B00192F1 | BUCKET ASSY,1.2m3 | ||
| LQ61B00193F1 | BUCKET ASSY,1.2M3 | ||
| 1 | LQ61B00190F1 | BUCKET ASSY | 1 |
| 1-1 | LQ61B00191P1 | BUCKET | 1 |
| 1-1A | LQ69B01024P1 | EDGE,CUTTING | 1 |
| 1-1B | LQ61B01002P1 | ADAPTER | 5 |
| 1-2 | LQ61B01003F1 | TOOTH ASSY | 5 |
| 1-2A | LQ61B01003S001 | POINT | 1 |
| 1-2B | LQ61B01003S002 | PIN | 1 |
| 1-2C | LQ61B01003S003 | SPRING | 1 |
| 1-3 | 2412N289D11 | CUTTER,SIDE | 1 |
| 1-4 | 2412N289D21 | CUTTER,SIDE | 1 |
| 1-5 | LQ61B01026P1 | BUSHING | 1 |
| 1-6 | LQ61B01027P1 | PLATE | 1 |
| 1-7 | LQ61B01024P1 | SHIM (1.0) | 5 |
| 1-8 | 2419T3747D2 | PIN | 1 |
| 1-9 | ZS13C24075 | CAPSCREW | 8 |
| 1-10 | ZS13C16050 | CAPSCREW | 3 |
| 1-11 | ZN13C24019 | NUT | 8 |
| 1-12 | YB61B01007P1 | WASHER | 3 |
| 1-13 | ZW16H16000 | WASHER | 3 |
| 2 | LQ61B00194P1 | BUCKET | 1 |
| 2-1 | LQ61B01132P1 | PLATE | 2 |
| 2-2 | LQ61B01133P1 | PLATE | 2 |
| 2-3 | LQ61B01134P1 | BAR | 4 |
| 2-4 | LQ61B01135P1 | BAR,FLAT | 6 |
| 2-5 | YN61B01167P1 | BAR,FLAT | 4 |
| 2-6 | YN61B01168P1 | BAR,FLAT | 8 |
Part numbers as fitted to the Kobelco SK250-8 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Structurally, these 28 numbers fall into 9 Kobelco number series — LQ61B, 2412N, ZS13C among the largest. The list is weighted toward repeated items such as bucket, bar, plate and 5 hardware positions.
The high-quantity positions are: ZS13C24075 (capscrew, ×8 per assembly); ZN13C24019 (nut, ×8 per assembly); YN61B01168P1 (bar,flat, ×8 per assembly). The full list follows below.
The Bucket Assembly,1.2M3 (1.57Cu Yd) group on the Kobelco SK250-8 contains 28 separately orderable part numbers. The table below lists each one with its quantity per assembly, taken directly from the machine's own parts catalogue.
Send the Kobelco SK250-8 serial number with your enquiry. Pin and bushing positions changed across the production run on several Kobelco SK250-8 variants, and the serial number is the fastest way to confirm the correct set before you order.
HD marks the heavy-duty version of the attachment, which uses its own pin and bushing part numbers that do not interchange with the standard version. Confirm which version the machine carries before ordering. If that matches your case, quote ZS13C24075 and we will take it from there.
Yes — hardware is the cheapest line in the order and the most expensive to revisit, so a joint rebuild normally includes fresh clips, shims and bolts.
We supply genuine parts ordered through original supply channels, and quality OEM alternatives where that is the practical choice. The condition of every item is declared on the quotation.
Frame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListArm Rest
View Parts ListLow Group (For Long Crawler)
View Parts ListFilter List
View Parts ListEngine Assy
View Parts ListEngine Instal
View Parts ListRadiator Instal
View Parts ListKobelco SK250-8 workshop guide
Read the guideKobelco workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK250-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.