Kobelco SK250-8 · Engine Assembly · 22 part numbers
No illustration for this section
The Engine Assembly is listed without an exploded view in the SK250-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
22 separately orderable part numbers make up the Engine Assembly on the Kobelco SK250-8. Where the drawing shows a callout, the Ref. column in the table carries the same number. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| . | ENGINE ASSY | ||
| LQ02P00029F1 | ENGINE INSTAL | ||
| LQ02P00023F1 | ENGINE INSTAL | 1 | |
| 1 | LQ02P00030F1 | ENGINE ASSY | 1 |
| 2 | LQ05P01307P1 | HOSE,RADIATOR | 1 |
| 3 | LQ05P01306P1 | HOSE,RADIATOR | 1 |
| 4 | LQ05P01309P1 | HOSE | 1 |
| 5 | LQ05P01308P1 | HOSE | 1 |
| 6 | YN20M01494D1 | V-BELT | 1 |
| ENGINE PARTS No. | |||
| 7 | VH900149343A | V-BELT | 1 |
| 8 | VH281002894A | STARTER ASSY | 1 |
| 9 | VH270402192A | ALTERNATOR ASSY | 1 |
| 10 | VH040166104A | THERMOSTAT KIT | 1 |
| 11 | VH156601090A | PLUG ASSY,OIL | 1 |
| 12 | YN30T01001P1 | FILTER ELEMENT | 1 |
| (VH156072190A) | OIL E/G | ||
| 13 | YN30T01002P1 | FILTER ELEMENT | 1 |
| (VH23390E0010) | FUEL E/G | ||
| 14 | VH834601510A | SWITCH ASSY | 1 |
| 15 | VH985119116A | O-RING | 1 |
| 16 | VH894101290A | SENSOR ASSY,SPEED | 1 |
Factory part numbers as fitted to the Kobelco SK250-8 excavator. "Ref." matches the callout number on the exploded view where one is shown.
Read as a dataset, the 22 part numbers spread across 12 number series (LQ05P, LQ02P, YN30T being the biggest) The list is weighted toward repeated items such as engine, hose, instal and 1 hardware positions.
Where to start in this table: LQ02P00023F1 (engine instal, ×1 per assembly); LQ02P00030F1 (engine assy, ×1 per assembly); LQ05P01307P1 (hose,radiator, ×1 per assembly). The full list follows below.
The Kobelco SK250-8 is powered by a Hino diesel, and this group covers the machine-side components around it — the parts that carry Kobelco part numbers rather than engine-only numbers. Where an engine-mounted item also carries an engine maker's cross-reference, it appears in the table alongside.
Engine-side work on the Kobelco SK250-8 is planned either by symptom or by service hours. Both routes end at the same table: the symptom or the service item maps to a callout, the callout maps to a part number, and the quotation follows.
Yes. Gaskets, seals and O-rings all carry their own part numbers in the table, so a top-end gasket set can be quoted from the list. In this group, LQ02P00023F1 is the number most often quoted for that enquiry.
Hoses, clamps and caps are straightforward; cores and complete assemblies are heavier work. We supply the parts either way.
Both. Assemblies are listed alongside their internal components, so a targeted repair and a full exchange are quoted from the same table.
Engine Instal
View Parts ListRadiator Instal
View Parts ListRadiator Group
View Parts ListRadiator Assy
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListCleaner Assy,Air
View Parts ListKobelco SK250-8 workshop guide
Read the guideKobelco workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK250-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.