Kobelco SK250-8 · Conditioner Assembly,Air · 44 part numbers
No illustration for this section
The Conditioner Assembly,Air is listed without an exploded view in the SK250-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Every part number in the Kobelco SK250-8 Conditioner Assembly,Air is listed here — 44 of them, with quantities. Where the drawing shows a callout, the Ref. column in the table carries the same number. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LQ20M00046F1 | CONDITIONER ASSY,AIR | ||
| 1 | R18T0026D87 | HOSE | 1 |
| 2 | R18T0026D36 | HOSE | 1 |
| 3 | YN20M01646P1 | BRACKET | 2 |
| 4 | YN20M01494D1 | V-BELT | 1 |
| 5 | ZC16X02000 | CLIP | 4 |
| 6 | ZM73C10025 | SEMS-BOLT | 5 |
| 7 | ZM73C06020 | SEMS-BOLT | 2 |
| 8 | ZM73C08020 | SEMS-BOLT | 9 |
| 9 | ZS18C08100 | CAPSCREW | 4 |
| 10 | ZW16P08000 | WASHER | 6 |
| 11 | ZS18C08025 | CAPSCREW | 2 |
| 12 | YN20M01427DA | TUBE | 1 |
| 13 | YN20M01046DT | TUBE | 1 |
| 14 | LQ20M01130D1 | TUBE | 1 |
| 15 | LQ20M01131D1 | TUBE | 1 |
| 16 | YN20M01682P1 | BRACKET | 1 |
| 17 | 2418Z1333D10 | TUBE | 1 |
| 18 | YN20M01492D5 | HOSE | 1 |
| 20 | ZC16X02400 | CLIP | 2 |
| 21 | YN20M01677P1 | BRACKET | 1 |
| 22 | ZM73C10040 | SEMS-BOLT | 2 |
| 23 | ZM73C08025 | SEMS-BOLT | 4 |
| 24 | ZC48X24014 | CLIP | 3 |
| 25 | PY01P01043D4 | CLIP | 18 |
| 27 | YN20M00113F1 | CONDITIONER ASSY,AIR | 1 |
| 30 | YN20M01468P1 | PANEL | 1 |
| 32 | YX91V00001F1 | COMPRESSOR ASSY,AIR | 1 |
| 33 | YN20M01559F1 | PULLEY ASSY | 1 |
| 34 | YN20M01675P1 | CONDENSER | 1 |
| 35 | LQ96V00021F1 | DRIER ASSY,AIR | 1 |
| 39 | YN50V01015P3 | AIR-CON,FILTER | 1 |
| . | (OUTER) | ||
| 40 | YN52S00044P1 | SENSOR | 1 |
| 49 | YN13E01375P1 | CLIP | 1 |
| 50 | LC20M01126P1 | CONNECTOR | 1 |
| 51 | YN20M01597P1 | BRACKET | 1 |
| 52 | ZC46X22011 | CLIP | 1 |
| 53 | ZM73C10020 | SEMS-BOLT | 1 |
| 54 | YN20M01514P1 | GROMMET | 1 |
| 55 | YN20M01676P1 | GROMMET | 1 |
| 56 | ZS18C06050 | CAPSCREW | 4 |
| 57 | ZW16P06000 | WASHER | 4 |
| 58 | 2418Z1333D13 | TUBE | 1 |
Listed for the Kobelco SK250-8 excavator. Every number can be quoted on its own or as a complete set, and fitment is confirmed from your machine serial before we price it.
The 44 entries group into 17 distinct number series, led by YN20M, ZM73C. Expect repeated items such as clip, sems, bolt and 17 hardware positions when you work through it.
Three numbers worth noting first: PY01P01043D4 (clip, ×18 per assembly); ZM73C08020 (sems-bolt, ×9 per assembly); ZW16P08000 (washer, ×6 per assembly). The full list follows below.
Where an illustration exists, its callout numbers map to the Ref. column in the table. Where this section has no illustration, the parts table is the authoritative list of Kobelco part numbers.
Refrigerant-side seals and O-rings in this group are small, cheap and worth ordering alongside any major component, since opening the system means replacing them anyway.
Yes — cab and climate orders combine naturally since the parts live in the same area of the machine and ship well together. On the Kobelco SK250-8, that usually comes back to PY01P01043D4 (clip) in this group.
Some changed. Send the machine serial number and we confirm the parts that match your build before quoting.
Yes — the complete group can be quoted as one list, or item by item from the table above.
Kobelco SK250-8 workshop guide
Read the guideKobelco workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK250-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.