Kobelco SK250-8 · Teiming Gear Cover And Flywheel Housing · 25 part numbers
No illustration for this section
The Teiming Gear Cover And Flywheel Housing is listed without an exploded view in the SK250-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Teiming Gear Cover And Flywheel Housing group on the Kobelco SK250-8 contains 25 separately orderable part numbers. Callout numbers on the exploded view map one-to-one to the Ref. column in the table. The list comes straight from the Kobelco SK250-8 catalogue for this machine family.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| . | TEIMING GEAR COVER AND | ||
| 11306 | VH113061480A | COVER SUB ASSY,F/H DUST | 1 |
| 11309 | VH11309E0010 | RETAINER SUB ASSY,OIL SEAL | 1 |
| 11351 | VH11351E0272A | HOUSING,FLYWHEEL | 1 |
| 11357 | VH113571022A | GASKET,RR END PLATE | 1 |
| 11357A | VH113571062A | GASKET,RR END PLATE | 1 |
| 11390 | VH113901090A | PLATE,RR END | 1 |
| 12281 | VH122811901A | HANGER,ENG | 1 |
| 900113 A | VH900113120A | HELISERT | 4 |
| 900124 | VH900124540A | BOLT | 2 |
| 9029A | VH902910281A | BOLT | 2 |
| 9068- 08000 | VH906808000A | BOLT,FLANGE | 1 |
| 9068- 08250 | VH906808250A | BOLT,FLANGE | 5 |
| 9068- 10200 | VH906810200A | BOLT,FLANGE | 3 |
| 9068- 10750 | VH906810750A | BOLT,FLANGE | 2 |
| 9068- 60850 | VH906860850A | BOLT,FLANGE | 1 |
| 9069G | VH906908149A | BOLT,FLANGE | 2 |
| 9181- 08160 | VH918108160A | BOLT | 2 |
| 9241- 10107 | VH924110107A | NUT | 1 |
| 9339A | VH933910115A | STUD | 1 |
| 9349A | VH934914128A | STUD | 1 |
| 9402- 12350 | VH940212350A | BOLT,W/WASHER | 2 |
| 9419A | VH941916101A | BOLT | 4 |
| 9828A | VH982879103A | SEAL,OIL | 1 |
| 9828B | VH982801228A | SEAL,OIL | 1 |
Factory part numbers as fitted to the Kobelco SK250-8 excavator. "Ref." matches the callout number on the exploded view where one is shown.
Structurally, these 25 numbers fall into 12 Kobelco number series — VH113, VH906, VH900 among the largest. The list is weighted toward repeated items such as bolt, flange, oil and 12 hardware positions.
Where to start in this table: VH906808250A (bolt,flange, ×5 per assembly); VH900113120A (helisert, ×4 per assembly); VH941916101A (bolt, ×4 per assembly). The full list follows below.
Cooling and fuel-system faults on the Kobelco SK250-8 usually show up as overheating under load, hard starting, or loss of power. Because each component in this group is separately orderable, the repair can be scoped to the parts actually involved instead of a wholesale exchange.
Where an item in this group is engine-maker branded rather than Kobelco-numbered, the cross-reference in the table lets us quote the identical part through the engine channel when that is faster or cheaper.
Yes. The parts in this group carry Kobelco part numbers; where an engine maker's cross-reference exists it is listed alongside, and we can quote against either number. In this group, VH906808250A is the number most often quoted for that enquiry.
Loss of power under load, blue or black exhaust smoke, and oil at the compressor outlet are the usual reports. Send the symptom and we will indicate the relevant part numbers.
Yes for engine-maker cross-referenced items — the cross-references in the table let us quote from the engine nameplate number directly.
Engine Assy
View Parts ListEngine Instal
View Parts ListRadiator Instal
View Parts ListRadiator Group
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListRadiator Assy
View Parts ListKobelco SK250-8 workshop guide
Read the guideKobelco workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK250-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.