Kobelco SK260LC-12M 6.2M Boom Hydraulic Piping — Exploded View & Part Numbers

Kobelco SK260LC-12M · 6.2M Boom Hydraulic Piping · 29 part numbers

Illustration reproduced from the Kobelco SK260LC-12M parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK260LC-12M

6.2M Boom Hydraulic Piping

The Kobelco SK260LC-12M 6.2M Boom Hydraulic Piping breaks down into 29 individually orderable part numbers. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. All numbers are taken from the machine's own parts catalogue — nothing here is generic.

• 29 part numbers in this group, all listed below
• Kobelco SK260LC-12M excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

The 29 entries group into 11 distinct number series, led by YN42H, LB42H. Expect repeated items such as clamp, tube, ring and 1 hardware positions when you work through it.

Where to start in this table: ZM73C12035 (sems bolt -, ×26 per assembly); YN64H01392D1 (cap, ×26 per assembly); YN42H02348P1 (clamp, ×6 per assembly). The full list follows below.

Send us the Kobelco SK260LC-12M serial number together with the part number or the symptom you are chasing. We confirm fitment from the serial range before quoting, and mixed orders are consolidated into a single shipment — a set of seals does not travel in its own parcel.

Hydraulic components are the heart of the Kobelco SK260LC-12M: main pump delivery, swing and travel drive, control valve sections and the lines and seals that connect them. When a circuit loses power, drifts under load, or runs noisy when warm, the fault is usually traced to one of the components in this group rather than to the machine as a whole.