Kobelco SK260LC-12M · Cylinder Mounting (Boom Cylinder) · 43 part numbers
No illustration for this section
The Cylinder Mounting (Boom Cylinder) is listed without an exploded view in the SK260LC-12M catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
43 separately orderable part numbers make up the Cylinder Mounting (Boom Cylinder) on the Kobelco SK260LC-12M. Take the callout number from the drawing and match it in the Ref. column below. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LB02B00087F1 | CYLINDER INSTAL | ||
| 1 | LB02B00088F1 | CYLINDER INSTAL | 1 |
| 2 | LB01V00018F1 | CYLINDER, BOOM | 2 |
| 1 | LB02B01165P1 | PIN | 2 |
| 2 | LB02B01093P1 | PIN | 1 |
| 3 | LB02B01044P1 | COLLAR | 2 |
| 4 | LC02B01906P1 | PLATE | 2 |
| 5 | LQ12B02099P1 | PLATE | 2 |
| 6 | HS18C20175G2 | CAPSCREW | 2 |
| 7 | ZS18C16035 | CAPSCREW | 2 |
| 8 | ZN18C20016 | NUT | 4 |
| 9 | ZW16H16000 | WASHER | 2 |
| 10 | 2420T2747D18 | SHIM (0.5) | 2 |
| 11 | 2420T2747D19 | SHIM (0.9) | 2 |
| 12 | 2420T2747D3 | SHIM (1.6) | 2 |
| 13 | LB02B01043D1 | SHIM (2.0) | 6 |
| 2 | LB01V01011P1 | BUSHING | 4 |
| 5 | LB01V00018S005 | COVER | 1 |
| 6 | LB01V00018S006 | BUSHING | 1 |
| 7 | LB01V00018S007 | RING, RETAINING | 1 |
| 8 | LB01V00018S008 | SEAL | 1 |
| 9 | LB01V00018S009 | SEAL | 1 |
| 10 | LB01V00018S010 | RING, BACK UP | 1 |
| 11 | LB01V00018S011 | SEAL, DUST | 1 |
| 12 | ZD12G13500 | O RING - | 1 |
| 13 | LB01V00018S013 | RING, BACK UP | 1 |
| 14 | LB01V00018S014 | O RING - | 1 |
| 15 | LB01V00018S015 | RING | 1 |
| 16 | LB01V00018S016 | PISTON | 1 |
| 17 | LB01V00018S017 | SEAL, PISTON | 1 |
| 18 | LB01V00018S018 | RING, WEAR | 2 |
| 19 | LB01V00018S019 | RING | 2 |
| 20 | ZD12G08000 | O RING - | 1 |
| 21 | LB01V00018S021 | RING, BACK UP | 2 |
| 22 | LB01V00018S022 | NUT | 1 |
| 23 | YN01V00148S024 | SETSCREW | 1 |
| 24 | YN01V00148S027 | CAPSCREW | 16 |
| 25 | LB01V00018S025 | SEAL | 4 |
| LB01V00018R100 | SEAL KIT, CYL ROD | 1 | |
| LB01V00018R200 | SEAL KIT, CYL PISTON | 1 | |
| LB01V00018R300 | SEAL KIT, CYL | 1 | |
| LB01V00018R400 | TUBE KIT, CYL | 1 | |
| LB01V00018R500 | ROD KIT, CYL | 1 |
Part numbers as fitted to the Kobelco SK260LC-12M excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Read as a dataset, the 43 part numbers spread across 11 number series (LB01V, LB02B, 2420T being the biggest) In practice that means repeated items such as ring, seal, kit and 7 hardware positions.
The high-quantity positions are: YN01V00148S027 (capscrew, ×16 per assembly); LB02B01043D1 (shim (2.0), ×6 per assembly); ZN18C20016 (nut, ×4 per assembly). The full list follows below.
Hydraulic components are the heart of the Kobelco SK260LC-12M: main pump delivery, swing and travel drive, control valve sections and the lines and seals that connect them. When a circuit loses power, drifts under load, or runs noisy when warm, the fault is usually traced to one of the components in this group rather than to the machine as a whole.
Swing, travel and implement circuits share the same pump flow on the Kobelco SK260LC-12M, which is why a fault in one function can point back to a component listed in this group. A pressure test narrows the circuit down; the drawing then narrows it to a part number.
It is the quantity fitted per assembly in the catalogue — useful when a job calls for more than one of the same part, such as O-rings fitted in a pack. If that matches your case, quote YN01V00148S027 and we will take it from there.
Both. Every quotation states the condition of each item — genuine through original supply channels, or a quality OEM alternative — so the choice is yours and it is documented.
We quote new components from this table — genuine or OEM by declaration — rather than exchange units, so you know exactly what is being fitted.
Fuel Tank Mounting (Fuel Pump Mounting, Dust Cover, Remote Drain)
View Parts ListHydraulic Oil Tank Mounting (Right-View Camera)
View Parts ListPto Assembly (Without Hydraulic Pto)
View Parts ListSwing Motor Mounting (Sk280)
View Parts ListFilter List
View Parts ListUndercarriage Parts List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListKobelco SK260LC-12M workshop guide
Read the guideKobelco SK260LC-12M workshop guide
Read the guideKobelco SK260LC-12M workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK260LC-12M — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.