Kobelco SK260LC-12M Remote Control Piping (Hydraulic Breaker) — Exploded View & Part Numbers

Kobelco SK260LC-12M · Remote Control Piping (Hydraulic Breaker) · 44 part numbers

Illustration reproduced from the Kobelco SK260LC-12M parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK260LC-12M

Remote Control Piping (Hydraulic Breaker)

Every part number in the Kobelco SK260LC-12M Remote Control Piping (Hydraulic Breaker) is listed here — 44 of them, with quantities. Take the callout number from the drawing and match it in the Ref. column below. All numbers are taken from the machine's own parts catalogue — nothing here is generic.

• 44 part numbers in this group, all listed below
• Kobelco SK260LC-12M excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

The 44 entries group into 20 distinct number series, led by 2436U, YN30V. The list is weighted toward repeated items such as hose, ring, shim and 10 hardware positions.

If you are quoting from this group, start with: ZH22X04000 (connector, ×3 per assembly); ZH32X04000 (elbow, 90, ×3 per assembly); 2436U1487S37 (ball, ×3 per assembly). The full list follows below.

Send us the Kobelco SK260LC-12M serial number together with the part number or the symptom you are chasing. We confirm fitment from the serial range before quoting, and mixed orders are consolidated into a single shipment — a set of seals does not travel in its own parcel.

Hydraulic components are the heart of the Kobelco SK260LC-12M: main pump delivery, swing and travel drive, control valve sections and the lines and seals that connect them. When a circuit loses power, drifts under load, or runs noisy when warm, the fault is usually traced to one of the components in this group rather than to the machine as a whole.