Kobelco SK260LC-12M Return Hydraulic Piping — Exploded View & Part Numbers

Kobelco SK260LC-12M · Return Hydraulic Piping · 41 part numbers

Illustration reproduced from the Kobelco SK260LC-12M parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK260LC-12M

Return Hydraulic Piping

This page lists all 41 part numbers in the Kobelco SK260LC-12M Return Hydraulic Piping. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.

• 41 part numbers in this group, all listed below
• Kobelco SK260LC-12M excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

Read as a dataset, the 41 part numbers spread across 22 number series (LC32H, ZD12P, LQ32H being the biggest) The list is weighted toward repeated items such as hose, connector, ring and 6 hardware positions.

If you are quoting from this group, start with: HM83C12035G1 (sems bolt -, ×4 per assembly); ZM73C10030 (sems bolt -, ×4 per assembly); HM83C12040G1 (sems bolt -, ×4 per assembly). The full list follows below.

Hydraulic components are the heart of the Kobelco SK260LC-12M: main pump delivery, swing and travel drive, control valve sections and the lines and seals that connect them. When a circuit loses power, drifts under load, or runs noisy when warm, the fault is usually traced to one of the components in this group rather than to the machine as a whole.

Swing, travel and implement circuits share the same pump flow on the Kobelco SK260LC-12M, which is why a fault in one function can point back to a component listed in this group. A pressure test narrows the circuit down; the drawing then narrows it to a part number.