Kobelco SK260LC-12M · Travel Hydraulic Piping (SK260, SK280) · 8 part numbers
No illustration for this section
The Travel Hydraulic Piping (SK260, SK280) is listed without an exploded view in the SK260LC-12M catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Kobelco SK260LC-12M Travel Hydraulic Piping (SK260, SK280) breaks down into 8 individually orderable part numbers. The Ref. column mirrors the callout numbers on the illustration, so a part can be ordered straight from the drawing. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LQ12H00010F1 | HYD LINES, PROPEL | ||
| 1 | ZA23F28016 | CONNECTOR | 4 |
| 2 | ZH22X08000 | CONNECTOR | 2 |
| 2 1 - | ZD12P01800 | O RING - | 1 |
| 3 | 2444Z2525 | CONNECTOR | 2 |
| 3 1 - | ZD12P01100 | O RING - | 1 |
| 4 | ZH32X04000 | ELBOW, 90 | 2 |
| 5 | ZD12P02900 | O RING - | 4 |
Factory part numbers as fitted to the Kobelco SK260LC-12M excavator. "Ref." matches the callout number on the exploded view where one is shown.
The 8 entries group into 6 distinct number series, led by ZD12P, LQ12H. In practice that means repeated items such as connector, ring, hyd.
Where to start in this table: ZA23F28016 (connector, ×4 per assembly); ZD12P02900 (o ring -, ×4 per assembly); ZH22X08000 (connector, ×2 per assembly). The full list follows below.
Working from the exploded view is the fastest way to order. Find the component on the drawing, note its callout number, and take the matching reference from the table — that mapping removes the guesswork that comes with describing a part over the phone or in an email.
For workshops planning a full hydraulic health check, the practical sequence is seals first, then wear items such as valve plates and bushings, and only then complete assemblies. The table below supports that sequence because every level of the breakdown is separately orderable.
We quote new components from this table — genuine or OEM by declaration — rather than exchange units, so you know exactly what is being fitted. In this group, ZA23F28016 is the number most often quoted for that enquiry.
Slow or drifting functions, a circuit that weakens as the oil warms, noise under load, and external leakage at joints are the usual reports. Pressure testing points to the circuit; the drawing callouts then point to the part.
Usually yes — the callout numbers on the drawing map directly to the Ref. column in the table. If your machine differs by serial range, send a photo of the part and we will confirm before quoting.
Fuel Tank Mounting (Fuel Pump Mounting, Dust Cover, Remote Drain)
View Parts ListHydraulic Oil Tank Mounting (Right-View Camera)
View Parts ListPto Assembly (Without Hydraulic Pto)
View Parts ListSwing Motor Mounting (Sk280)
View Parts ListFilter List
View Parts ListUndercarriage Parts List
View Parts ListNut Part Numbers
View Parts ListBushing Part Numbers
View Parts ListKobelco SK260LC-12M workshop guide
Read the guideKobelco SK260LC-12M workshop guide
Read the guideKobelco SK260LC-12M workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK260LC-12M — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.