Kobelco SK330-8 · Cylinder Assembly,Arm · 37 part numbers

Illustration reproduced from the Kobelco SK330-8 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.
37 separately orderable part numbers make up the Cylinder Assembly,Arm on the Kobelco SK330-8. Take the callout number from the drawing and match it in the Ref. column below. Every entry is a genuine Kobelco part number, confirmed against the serial range before we quote.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LC01V00054F1,F2 | CYLINDER ASSY,ARM | ||
| 3 | LC01V00054S003 | CYLINDER HEAD | 1 |
| 4 | 2438U1171S4 | BUSHING | 1 |
| 5 | 2438U1171S5 | RING,RETAINING | 1 |
| 6 | LC01V00054S006 | RING,BUFFER | 1 |
| 7 | LC01V00054S007 | U-RING | 1 |
| 8 | LS01V00020S008 | RING,BACK UP | 1 |
| 9 | 2438U1171S34 | RING,WIPER | 1 |
| 10 | ZD12G16000 | O-RING | 1 |
| 11 | 2438U1171S11 | RING,BACK UP | 1 |
| 12 | LC01V00005S012 | CAPSCREW | 12 |
| 13 | LC01V00054S013 | BEARING,CUSHION | 1 |
| 14 | LC01V00054S014 | SEAL,CUSHION | 1 |
| 15 | LC01V00054S015 | PISTON | 1 |
| 16 | 2438U1171S16 | RING,SEAL | 1 |
| 17 | 2438U1171S17 | RING,BACK UP | 2 |
| 18 | LC01V00054S018 | RING,SLIDE | 2 |
| 19 | 2438U1171S19 | RING,SLIDE | 2 |
| 20 | LC01V00005S020 | SHIM | 1 |
| 21 | LC01V00054S021 | NUT | 1 |
| 22 | 2438U1171S22 | SETSCREW | 1 |
| 23 | 2436U330S27 | BALL | 1 |
| 24 | LC01V00054S024 | BEARING,CUSHION | 1 |
| 25 | LC01V00005S025 | SEAL,CUSHION | 1 |
| 26 | 2438U1137S26 | STOPPER | 2 |
| 27 | 2438U1171S27 | RING,RETAINING | 1 |
| 28 | LC01V01029P1 | BUSHING | 2 |
| 29 | 2438U1170S25 | RING,WIPER | 4 |
| 32 | 2438U1171S28 | BUSHING | 2 |
| LC01V00054R100 | REPAIR KIT | 1 | |
| . | ROD SIDE | ||
| LC01V00054R200 | REPAIR KIT | 1 | |
| LC01V00054R300 | REPAIR KIT | 1 | |
| LC01V00054R400 | REPAIR KIT | 1 | |
| LC01V00054R500 | REPAIR KIT | 1 | |
| LC01V00054R600 | REPAIR KIT | 1 | |
| LC01V00054R700 | REPAIR KIT | 1 |
Part numbers as fitted to the Kobelco SK330-8 excavator. Where a position changed during the production run, the serial number settles which one applies to your machine.
Read as a dataset, the 37 part numbers spread across 5 number series (LC01V, 2438U, LS01V being the biggest) In practice that means repeated items such as ring, repair, kit and 3 hardware positions.
The high-quantity positions are: LC01V00005S012 (capscrew, ×12 per assembly); 2438U1170S25 (ring,wiper, ×4 per assembly); 2438U1171S17 (ring,back up, ×2 per assembly). The full list follows below.
For workshops planning a full hydraulic health check, the practical sequence is seals first, then wear items such as valve plates and bushings, and only then complete assemblies. The table below supports that sequence because every level of the breakdown is separately orderable.
Rebuild-at-component-level is the practical route for most Kobelco SK330-8 hydraulic assemblies. Wear shows up at predictable points — spool clearances, valve plates, bearing sets, seal packages — and those items are listed individually, so you can quote only what is worn instead of exchanging the complete unit.
It is the quantity fitted per assembly in the catalogue — useful when a job calls for more than one of the same part, such as O-rings fitted in a pack. If that matches your case, quote LC01V00005S012 and we will take it from there.
Both. Every quotation states the condition of each item — genuine through original supply channels, or a quality OEM alternative — so the choice is yours and it is documented.
We quote new components from this table — genuine or OEM by declaration — rather than exchange units, so you know exactly what is being fitted.
Tank Instal,Hyd
View Parts ListMotor Instal,Swing
View Parts ListHyd Lines,Pump (Suction,Delivery)
View Parts ListHyd Lines,Upp (Main)
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListEngine Assy
View Parts ListKobelco SK330-8 workshop guide
Read the guideKobelco SK330-8 workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK330-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.