Kobelco SK330-8 · Counterweight Installation · 13 part numbers
No illustration for this section
The Counterweight Installation is listed without an exploded view in the SK330-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Below is the complete Kobelco SK330-8 Counterweight Installation — 13 part numbers with the quantity fitted per assembly. Where the drawing shows a callout, the Ref. column in the table carries the same number. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LC60C00087F1 | COUNTERWEIGHT INSTAL | ||
| LC60C00051F1 | COUNTERWEIGHT INSTAL | ||
| A1 | HS13F36420G1 | CAPSCREW | 4 |
| A2 | HY26Y37083G2 | WASHER | 4 |
| A3 | LC60C01135P1 | SHIM (1.6) | 3 |
| A4 | LC60C01138P1 | SHIM (2.3) | 3 |
| A5 | LC60C01139P1 | SHIM (3.2) | 4 |
| LC60C00054F1 | COUNTERWEIGHT ASSY | ||
| B1 | LC60C01174P1 | INSULATION | 1 |
| B2 | LC60C01101P1 | INSULATION | 1 |
| B3 | LC60C01102P1 | INSULATION | 1 |
| B4 | LC60C01103P1 | INSULATION | 1 |
| C1 | LC60C00088P1 | COUNTERWEIGHT | 1 |
Kobelco SK330-8 excavator part numbers, taken from the machine's own parts catalogue. Items shared with the closely related SK350LC-8 and the later SK330-9 generation are confirmed from your model plate before quoting.
Structurally, these 13 numbers fall into 3 Kobelco number series — LC60C, HS13F, HY26Y among the largest. The list is weighted toward repeated items such as counterweight, insulation, shim and 2 hardware positions.
If you are quoting from this group, start with: HS13F36420G1 (capscrew, ×4 per assembly); HY26Y37083G2 (washer, ×4 per assembly); LC60C01139P1 (shim (3.2), ×4 per assembly). The full list follows below.
Undercarriage and structural wear is progressive: play at a joint, a knocking sound on direction change, oval wear on a pin. Because each position carries its own part number, worn positions can be replaced individually instead of ordering the complete group.
Where the attachment configuration differs — long boom, heavy-duty arm, alternative bucket — the pin and bushing numbers change with it. The serial number on the machine is the reliable way to pick the right line from this table.
If the boom, arm or bucket was changed after delivery, tell us the attachment part number as well as the machine serial — the numbers must match the attachment actually fitted. The practical first number to ask for in this group is HS13F36420G1.
On several Kobelco SK330-8 variants they do — pin and bushing part numbers changed with the attachment configuration. Send the serial number and we confirm the correct group before quoting.
Yes — we cover the Kobelco range beyond the Kobelco SK330-8. Send the model or the part number from the worn part and we will identify and quote it.
Frame Assy,Upp
View Parts ListArm Rest
View Parts ListLow Group (For Long Crawler)
View Parts ListIdler Assy
View Parts ListFilter List
View Parts ListEngine Assy
View Parts ListEngine Instal
View Parts ListRadiator Instal
View Parts ListKobelco SK330-8 workshop guide
Read the guideKobelco SK330-8 workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK330-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.