Kobelco SK330-8 · Engine Installation · 41 part numbers
No illustration for this section
The Engine Installation is listed without an exploded view in the SK330-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
Every part number in the Kobelco SK330-8 Engine Installation is listed here — 41 of them, with quantities. Where the drawing shows a callout, the Ref. column in the table carries the same number. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| LC02P00026F1 | ENGINE INSTAL | ||
| 11 | YN02P01133P1 | BRACKET | 1 |
| 12 | LC02P01046P1 | BRACKET | 4 |
| 13 | LC02P01045P1 | MOUNT,RUBBER | 4 |
| 14 | LC02P01049P1 | MOUNT,RUBBER | 4 |
| 15 | YN02P01088P1 | PLATE | 4 |
| 16 | YN02P01076P1 | BUSHING | 2 |
| 17 | YN02P01125P1 | CLAMP | 1 |
| 18 | ZC46X19011 | CLIP | 1 |
| 19 | ZN18C18015 | NUT | 4 |
| 20 | ZM22C10065 | SEMS-BOLT | 1 |
| 21 | ZM73C10035 | SEMS-BOLT | 2 |
| 22 | ZM73C12030 | SEMS-BOLT | 16 |
| 23 | ZS18C18150 | CAPSCREW | 4 |
| 24 | HS18C10140G1 | CAPSCREW | 2 |
| 25 | ZS18C10040 | CAPSCREW | 1 |
| 26 | ZW16H18000 | WASHER | 8 |
| 27 | ZW16P10000 | WASHER | 3 |
| 28 | PY01P01043D2 | CLIP | 2 |
| 29 | HX81X15110DX | TUBE | 1 |
| 35 | LC75S00003P1 | FAN | 1 |
| 36 | ZN18F10008 | NUT | 6 |
| 37 | ZW16H10000 | WASHER | 6 |
| ENGINE PARTS No. | |||
| 1 | VH156004110C | OIL-FILTER | 1 |
| 1-1 | VH156072190C | FILTER ELEMENT,OIL E/G | 1 |
| 2 | VH973925105A | ELBOW | 1 |
| 3 | VH973925106A | ELBOW | 1 |
| 5 | VH965912111B | WASHER | 4 |
| 6 | VH901912108C | BOLT | 2 |
| 7 | VH444082170A | HOSE | 1 |
| 8 | VH444082150A | HOSE | 1 |
| 9 | VH444082160A | HOSE | 1 |
| 10 | VH900236445A | HOSE | 1 |
| 30 | VH765894090C | LABEL | 1 |
| 31 | VH799041570A | CLIP | 1 |
| 32 | VH924008087A | NUT | 1 |
| 33 | VH985428101A | CLIP | 1 |
| 34 | VH964402835A | O-RING | 2 |
| 38 | VH136941180A | ADAPTER | 1 |
| 39 | VH906808200A | BOLT | 2 |
Listed for the Kobelco SK330-8 excavator. Every number can be quoted on its own or as a complete set, and fitment is confirmed from your machine serial before we price it.
The 41 entries group into 27 distinct number series, led by LC02P, YN02P. Expect repeated items such as bolt, clip, washer and 19 hardware positions when you work through it.
Three numbers worth noting first: ZM73C12030 (sems-bolt, ×16 per assembly); ZW16H18000 (washer, ×8 per assembly); ZN18F10008 (nut, ×6 per assembly). The full list follows below.
Where an item in this group is engine-maker branded rather than Kobelco-numbered, the cross-reference in the table lets us quote the identical part through the engine channel when that is faster or cheaper.
Every item is quoted with its condition declared — genuine through original supply channels, or a quality OEM alternative. Engine-mounted items can also be quoted against the engine maker's cross-reference where that is the practical route.
Elements, hoses and clamps head the list — the wear items in the cooling circuit — followed by complete cores when a leak has gone too far. On the Kobelco SK330-8, that usually comes back to ZM73C12030 (sems-bolt) in this group.
Yes. Gaskets, seals and O-rings all carry their own part numbers in the table, so a top-end gasket set can be quoted from the list.
Hoses, clamps and caps are straightforward; cores and complete assemblies are heavier work. We supply the parts either way.
Engine Assy
View Parts ListRadiator Instal
View Parts ListRadiator Group
View Parts ListRadiator Assy
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListCleaner Assy,Air
View Parts ListKobelco SK330-8 workshop guide
Read the guideKobelco SK330-8 workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK330-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.