Kobelco SK330-8 · Gauge Assembly,Cluster · 11 part numbers
No illustration for this section
The Gauge Assembly,Cluster is listed without an exploded view in the SK330-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Gauge Assembly,Cluster group on the Kobelco SK330-8 contains 11 separately orderable part numbers. Callout numbers on the exploded view map one-to-one to the Ref. column in the table. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| YN59S00021F1 | GAUGE ASSY,CLUSTER | ||
| 1 | YN59S00021S001 | GAUGE | 1 |
| 2 | YN59S00021S002 | PRINTED BOARD | 1 |
| 3 | YN59S00021S003 | CASE | 1 |
| 4 | YN59S00021S004 | CASE | 1 |
| 5 | YN59S00021S005 | BUZZER | 1 |
| 6 | YN59S00021S006 | PANEL | 1 |
| 7 | YN59S00021S007 | SCREW | 6 |
| 8 | YN59S00021S008 | SCREW | 6 |
| 9 | YN59S00021S009 | SCREW | 2 |
| 10 | YN59S00021S010 | SCREW | 7 |
Factory part numbers as fitted to the Kobelco SK330-8 excavator. "Ref." matches the callout number on the exploded view where one is shown.
Structurally, these 11 numbers fall into 1 Kobelco number series — YN59S among the largest. The list is weighted toward repeated items such as screw, gauge, case and 4 hardware positions.
Where to start in this table: YN59S00021S010 (screw, ×7 per assembly); YN59S00021S007 (screw, ×6 per assembly); YN59S00021S008 (screw, ×6 per assembly). The full list follows below.
Where no illustration exists for this section, the parts table below is the authoritative list — the callout numbering refers to the machine's own catalogue, and every entry is a real Kobelco part number.
Monitor and controller items vary by machine build, so the serial number matters more in this group than in most. Send it with the fault description and we confirm the correct variant before quoting.
Yes. Connectors, relays and switches all carry their own part numbers in the table above, so a single connector repair can be quoted without a harness. In this group, YN59S00021S010 is the number most often quoted for that enquiry.
Yes — electrical items are compact and consolidate easily into an existing shipment.
By part number — the catalogue lists harness sections as complete numbered items, and that is how we quote them.
Controller Instal
View Parts ListRelay Box Assy
View Parts ListBattery Assy
View Parts ListLamp Instal
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListEngine Assy
View Parts ListKobelco SK330-8 workshop guide
Read the guideKobelco SK330-8 workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK330-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.