Kobelco SK330-8 Reduction Assembly (Swing) — Exploded View & Part Numbers

Kobelco SK330-8 · Reduction Assembly (Swing) · 41 part numbers

Illustration reproduced from the Kobelco SK330-8 parts catalogue for part identification only. Callout numbers on the drawing match the Ref. column in the table below. Kobelco is a trademark of its respective owner; Shenyue Machinery is an independent supplier of excavator parts.

Kobelco SK330-8

Reduction Assembly (Swing)

Every part number in the Kobelco SK330-8 Reduction Assembly (Swing) is listed here — 41 of them, with quantities. Take the callout number from the drawing and match it in the Ref. column below. All numbers are taken from the machine's own parts catalogue — nothing here is generic.

• 41 part numbers in this group, all listed below
• Kobelco SK330-8 excavator parts — every number confirmed against your machine serial
• Callout numbers on the drawing match the Ref. column
• Genuine via original supply channels, or quality OEM alternative — declared on every quote
• 3,000+ part types on the shelf · 100,000+ part numbers available to order

Ask Price on WhatsApp Send Inquiry

The 41 entries group into 10 distinct number series, led by LC32W, ZR16X. The list is weighted toward repeated items such as ring, shim, pinion and 5 hardware positions.

If you are quoting from this group, start with: ZS23C20200 (capscrew, ×12 per assembly); LC32W01036P1 (bearing,needle, ×11 per assembly); LC32W01026P1 (washer,thrust, ×8 per assembly). The full list follows below.

Where this section carries no illustration, the parts table below is the authoritative list. Every entry is a real Kobelco part number — nothing on this page is generic or approximated.

Hardware and fittings in this group are inexpensive and light, so they consolidate into an existing shipment at almost no extra freight.