Kobelco SK330-8 · Teiming Gear Cover And · 32 part numbers
No illustration for this section
The Teiming Gear Cover And is listed without an exploded view in the SK330-8 catalogue — the parts table below is the authoritative reference, and every part number is confirmed against your machine serial before we quote.
The Teiming Gear Cover And group on the Kobelco SK330-8 contains 32 separately orderable part numbers. Callout numbers on the exploded view map one-to-one to the Ref. column in the table. All numbers are taken from the machine's own parts catalogue — nothing here is generic.
| Ref. | Part No. | Description | Qty / Assy |
|---|---|---|---|
| 11056 | VH110561092A | STAY SET,F/H | 1 |
| 11306 | VH113061480A | COVER SUB ASSY,F/H DUST | 1 |
| 11309 | VH113091060C | RETAINER SUB ASSY,OIL SEAL | 1 |
| 11351 | VH113517921A | HOUSING,FLYWHEEL | 1 |
| 11357 | VH113571022A | GASKET,RR END PLATE | 1 |
| 11357A | VH113571062A | GASKET,RR END PLATE | 1 |
| 11358 | VH113581011A | STAY,F/H,RH | 1 |
| 11359 | VH113591012A | STAY,F/H,LH | 1 |
| 11390 | VH113901050A | PLATE,RR END | 1 |
| 12281 | VH122811901A | HANGER,ENG | 1 |
| 900113 A | VH900113120A | HELISERT | 4 |
| 900124 | VH900124540B | BOLT | 1 |
| 900124 A | VH900124541B | BOLT | 1 |
| 900125 | VH900125237A | BOLT | 1 |
| 9029A | VH902910281A | BOLT | 2 |
| 9068- 08250 | VH906808250A | BOLT,FLANGE | 5 |
| 9068- 10200 | VH906810200A | BOLT,FLANGE | 3 |
| 9068- 10750 | VH906810750A | BOLT,FLANGE | 2 |
| 9068- 12650 | VH906812650A | BOLT,FLANGE | 4 |
| 9068- 60850 | VH906860850A | BOLT,FLANGE | 1 |
| 9069B | VH906914108B | BOLT,FLANGE | 4 |
| 9069G | VH906908149A | BOLT,FLANGE | 2 |
| 9181- 08160 | VH918108160A | BOLT | 2 |
| 9241- 10107 | VH924110107A | NUT | 1 |
| 9339A | VH933910115B | STUD | 1 |
| 9341- 14350 | VH934114350A | STUD | 1 |
| 9402- 12350 | VH940212350A | BOLT,W/WASHER | 2 |
| 9419A | VH941916101A | BOLT | 4 |
| 9600- 12090 | VH960012090A | PLUG | 1 |
| 9659A | VH965912111B | WASHER,SOFT | 1 |
| 9828A | VH982879103A | SEAL,OIL | 1 |
| 9828B | VH982801228A | SEAL,OIL | 1 |
Factory part numbers as fitted to the Kobelco SK330-8 excavator. "Ref." matches the callout number on the exploded view where one is shown.
Structurally, these 32 numbers fall into 15 Kobelco number series — VH113, VH906, VH900 among the largest. In practice that means repeated items such as bolt, flange, stay and 17 hardware positions.
Where to start in this table: VH906808250A (bolt,flange, ×5 per assembly); VH900113120A (helisert, ×4 per assembly); VH906812650A (bolt,flange, ×4 per assembly). The full list follows below.
Cab comfort complaints — wind noise, water ingress, a door that no longer closes positively — trace to small items in this group more often than to the shell itself. Seals, latches and hinge hardware are worth checking before anything structural is ordered.
The group runs from structural items that exist as assemblies down to individual seals, latches, clips and trim panels. Because both levels carry their own part numbers, you can scale the order from a single weather strip to a complete assembly without changing how you order.
Yes. Glass panels are listed as individual part numbers in the table above, so a windscreen, side glass or rear glass can be quoted without any surrounding hardware. In this group, VH906808250A is the number most often quoted for that enquiry.
Colour and finish follow the part number for your serial range. Where an original-finish item is no longer orderable, we say so upfront and quote the closest declared alternative.
The worn or broken part from two angles, plus the machine data plate — those two together let us match the part number without a catalogue hunt.
Cab Instal
View Parts ListCab Assy
View Parts ListWindow Assy,Roof
View Parts ListWindow Assy,Front
View Parts ListFilter List
View Parts ListFrame Assy,Upp
View Parts ListCounterweight Instal
View Parts ListEngine Assy
View Parts ListKobelco SK330-8 workshop guide
Read the guideKobelco SK330-8 workshop guide
Read the guideKobelco workshop guide
Read the guideRepair guides written from our own workshop notes on the Kobelco SK330-8 — the same components listed on this page, with the failure patterns and part numbers we see most often from trade customers.