Kobelco excavator parts specialist since 2007 — Guangzhou, China WhatsApp / WeChat: +86 181 4482 5432 · Tel: +86 20-32036036 · kobelco-parts@foxmail.com
Blog

Track Shoe Bolts and Plow Bolts on Kobelco Excavators

Track shoe bolts fail by loosening before they fail by breaking. Guangzhou Shenyue Machinery Technology Co., Ltd. explains plow-bolt head types, torque practice and the re-torque window.

Blog / Track Shoe Bolts and Plow Bolts on Kobelco E…
November 14, 2026 · Shenyue Kobelco Parts Team
Track adjuster and recoil spring assembly for SK330-8 from Guangzhou Shenyue stock
A track adjuster and recoil spring assembly for SK330-8 from our stock. Track tension and shoe bolts fail together more often than people expect: an over-tight chain loads every bolt on every shoe.

Track shoe bolts rarely get respect. They are the smallest line item on an undercarriage quotation, and they are also the reason pads work loose, chain pitch drifts and bolts shear two hundred hours after a "cheap" refit. On a Kobelco the shoe bolt is a plow bolt by head type: a low, rounded head that sits flush in the countersunk hole of the shoe plate, with a square neck underneath that bites into the hole and stops the bolt spinning while the nut is torqued. Guangzhou Shenyue Machinery Technology Co., Ltd. supplies bolt and nut sets alongside the chain, shoe and roller parts they hold on.

Head type is not a styling choice

The countersunk plow head exists because the shoe underside must slide over idlers and rollers without snagging. Substituting an ordinary hex-head bolt leaves the head proud, and the proud head machine-grooves every roller flange it passes. The square neck under the head is equally functional: it keys into the hole so the bolt cannot rotate during tightening. When a hole is worn round, the neck has nothing to key against, the bolt spins with the nut, and the joint never reaches torque. That is the moment to replace the shoe or drill the hole back to size, not to weld the bolt in.

Why they loosen in the first hundred hours

Every fresh bolt set relaxes. Gasket-like surfaces between shoe and link embed, threads bed in, and the initial torque decays in the first working window — most shops quote a check after roughly fifty hours and again after a hundred, then at service intervals. A loose bolt does not stay a loose bolt: the joint works, the hole elongates, the neighbouring bolts pick up its load, and one broken bolt becomes a rebuilt chain section. Checking is quick — torque-wrench spot checks on a sample per shoe, plus a hammer survey where a dull sound marks a loose joint faster than any gauge.

Sizes, grades and honest part numbers

Shoe bolts on twenty and thirty-tonne classes are commonly quoted in the M20 and M22 range, grade 10.9, with matching nuts; smaller machines step down, and wide or rocky-application shoes may carry more bolts per pad. These sizes are commonly quoted rather than catalogued in our records, so the nameplate and the old bolt remain the authority — measure shank diameter, thread pitch and head height before ordering, or shortlist candidates in our part number search first. Guangzhou Shenyue Machinery Technology Co., Ltd. grades every bolt and nut set genuine, OEM or aftermarket, and states the grade on the quotation instead of burying it in the invoice.

When a chain section is rebuilt, replace the bolts with the shoes and links together. A used bolt stretched once never returns to its original clamp load, and mixing old bolts into a new shoe is the most common cause of a refit that rattles apart.

Torque practice that keeps them tight

Torque the nut side, not the plow head, and use a long bar in a cross pattern across the pad group so the shoe seats flat before final torque. Lubricated threads torque differently from dry ones; pick one convention per shop and stay with it, and record which. After the first re-torque window, bolts that keep losing torque have a worn hole, a worn nut or a cracked shoe — find the member, not just the fastener. Chain side matters too: an over-tight track loads every bolt joint on every revolution, so set sag alongside the bolt work; our track wear measurement guide covers the sag and pitch checks that pair with this.

How to order bolt sets efficiently

Order bolts and nuts as matched sets per machine, count shoes and bolts per shoe, and add a margin for the bolts that will be cut off. Fleets standardising several machines save the most, because one bolt specification then covers every refit. Guangzhou Shenyue Machinery Technology Co., Ltd. ships bolt sets packed by machine, with the part photo taken before dispatch, within a stock programme of more than 3,000 part types on the shelf and over 100,000 part numbers available to order. Kobelco publishes machine and undercarriage reference material at kobelco.co.jp, and shoe width selection is covered in our grouser guide.

Frequently Asked Questions

What is a plow bolt on a Kobelco track shoe?

A countersunk-head bolt with a square neck that sits flush in the shoe plate and locks against rotation. Guangzhou Shenyue Machinery Technology Co., Ltd. supplies matched bolt and nut sets graded genuine, OEM or aftermarket for SK-series undercarriages.

How often should track shoe bolts be re-torqued?

Commonly quoted practice is a check after roughly fifty hours and again after a hundred, then at service intervals. Fresh bolts embed and lose clamp load early, and a hammer survey alongside torque spot checks finds loose joints quickly.

Can I reuse track shoe bolts after removing a shoe?

We advise against it. A stretched bolt never recovers its clamp load, and mixing used bolts into a refitted shoe is the most common cause of early loosening. Replace bolts, nuts, shoes and links as a set when a section is rebuilt.

What size are Kobelco track shoe bolts?

Commonly quoted sizes on twenty and thirty-tonne classes fall in the M20 to M22 range at grade 10.9, but the old bolt and the nameplate are the authority. Measure shank diameter, pitch and head height, and Guangzhou Shenyue Machinery Technology Co., Ltd. will match the set.

Need the parts this article talks about?

Send your part numbers and a photo of the nameplate — real photos and pricing come back with the quote.

Start an Inquiry